Thema: Kathrein UFS 916 mit Oscam -> HowTo

ein etwas längeres Startlog der 916 posten...

als unknown user taucht er auch nicht auf im Livelog?

ändere mal in der oscam.conf am Server folgendes:

httpallowed= statt 192.168.0.0 auf 192.168.178.1

---------

welche IP hat deine 916?

oscam.conf

ja dann bei httpallowed: statt 192.168.0.0 folgendes eingeben: 192.168.178.1-192.168.178.150

Auch keine Änderung, immer noch kein Kontakt zwischen Server und Client. Alle anderen laufen einwandfrei
Meine Idee wäre noch immer die alte Oscam (7095)auf dem Resi zum laufen zu kriegen...
Aber das funktioniert nicht, weil sie nicht startet.

Also... auf dem Server (Raspi) gibt es einen liebevollen Abschnitt [dvbapi]. In seinem Log fragt er folgerichtig: Was soll das? Der Raspi empfängt doch nichts. Das gehört auf den Client!

Habe es geändert, führt aber zu keiner Veränderung… Immer noch keine Anfrage vom Client an den Server.

eins ist mir noch aufgefallen:

• 21 18:17:51 591C90 c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
• 2019/10/21 18:17:51 591C90 c (dvbstapi) PTI: PTI4 open 0
• 2019/10/21 18:17:51 591C90 c (dvbstapi) PTI: PTI3 open 1
• 2019/10/21 18:17:51 591C90 c (dvbstapi) PTI: PTI2 open 2
• 2019/10/21 18:17:51 591C90 c (dvbstapi) PTI: PTI1 open 3
• 2019/10/21 18:17:51 591C90 c (dvbstapi) PTI: PTI0 open 4
• 2019/10/21 18:17:51 591C90 c (dvbstapi) liboscam_stapi5 v0.05, STPTI ID: 0xD6 initialized
• 2019/10/21 18:17:51 591C90 c (dvbapi) Detected /dev/stapi/stpti5_ioctl Api: 2, userconfig boxtype: 0
• 2019/10/21 18:17:51 58F4F0 h (webif) webif: decompressed 153295 bytes back into 371032 bytes
• 2019/10/21 18:17:51 58F4F0 h (webif) HTTP Server running. ip=0.0.0.0 port=8080

bei meinen anderen receivern macht er da hier(bei denen alles läuft):

2019/10/21 20:18:47 6002E8 c dvbapi: 12 entries read from oscam.dvbapi
2019/10/21 20:18:47 6002E8 c stapi: use alternative ioctls
2019/10/21 20:18:47 6002E8 c dvbapi: PTI: PTI4 open 0
2019/10/21 20:18:47 6002E8 c dvbapi: PTI: PTI3 open 1
2019/10/21 20:18:47 6002E8 c dvbapi: PTI: PTI2 open 2
2019/10/21 20:18:47 6002E8 c dvbapi: PTI: PTI1 open 3
2019/10/21 20:18:47 6002E8 c dvbapi: PTI: PTI0 open 4
2019/10/21 20:18:47 6002E8 c dvbapi: liboscam_stapi v.0.08a initialized
2019/10/21 20:18:48 6002E8 c dvbapi: found pmt file /tmp/pmt_PTI0.tmp
2019/10/21 20:18:48 6002E8 c dvbapi: new program number: 283D (0000:283D unknown) [pmt_list_management 3]
2019/10/21 20:19:14 5F7BB0 h all debug_level=0
2019/10/21 20:23:10 6002E8 c dvbapi: stopping demux for pmt file /tmp/pmt_PTI0.tmp
2019/10/21 20:23:10 6002E8 c dvbapi: found pmt file /tmp/pmt_PTI0.tmp
2019/10/21 20:23:10 6002E8 c dvbapi: new program number: 2873 (0000:2873 unknown) [pmt_list_management 3]

Jemand eine Idee?

@Link nur für registrierte und freigeschaltete Mitglieder sichtbar. hast du das irgendwann noch hinbekommen?

Ich kämpfe aktuell wieder mit einem UFS 916 und habe das gleiche Problem.

Es sieht so aus als würde Oscam nicht mitbekommen das ein Sender verschlüsselt ist.

Hier meine Configs ...

oscam.conf

[global]
logfile = /data/oscam.log
clienttimeout = 6000
fallbacktimeout = 3000
clientmaxidle = 660
cachedelay = 10
bindwait = 60
resolvedelay = 15
nice = 0
maxlogsize = 500
waitforcards = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 2
appendchaninfo = 1


[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = ufs910
pwd = box
pmt_mode = 0

[webif]
httpport = 8080
httprefresh = 30
httpallowed = 1.1.1.1-254.254.254.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam.dvbapi

P: 098C ## Sky DE
P: 1830 ## HD+
P: 0D95 ## ORF
P: 0500 ## Viaccess
P: 0B00 ## MTV
P: 0100 ## NC Plus Hotbird
P: 0B01 ## Orion
P: 1810 ## Digitalplus
P: 0D96 ## Skylink Astra 23
P: 1861 ## Polsat Hotbird

# I: 0 ## Ignoriert jede CAID ausserhalb der dvbapi

#S: PTI0 pmt_PTI0.tmp
#S: PTI1 pmt_PTI2.tmp
#S: PTI2 pmt_PTI2.tmp
#S: PTI2 pmt_PTI1.tmp

S: PTI0 pmt_PTI0.tmp
S: PTI1 pmt_PTI1.tmp
S: PTI2 pmt_PTI2.tmp
S: PTI3 pmt_PTI3.tmp
S: PTI4 pmt_PTI4.tmp
S: PTI5 pmt_PTI5.tmp
S: PTI6 pmt_PTI6.tmp
S: PTI7 pmt_PTI7.tmp
S: PTI8 pmt_PTI8.tmp
S: PTI9 pmt_PTI9.tmp

oscam.server

[reader]
enable = 1
label =
protocol = cccam
device =
user =
password =
group = 1
audisabled = 1
ccckeepalive = 1
disablecrccws = 1

[reader]
enable = 0
label =
protocol = cccam
device =
user =
password =
group = 1
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
fallback = 1

oscam.user

[account]
user = ufs910
pwd = box
au = 0
uniq = 0
group = 1
#caid = 09c4,0D05
#caid = 098C,1830,0D95,0500,0B00,0100,0B01,1810,0D96,1861

Die UFS 913 Box läuft mit diesem Setting einwandfrei.

Das Log der UFS 916 zeigt ...

2021/03/21 16:34:03 00000000 s (main) System name = Linux
2021/03/21 16:34:03 00000000 s (main) Host name = (none)
2021/03/21 16:34:03 00000000 s (main) Release = 2.6.32.59_stm24_0211-B2064_h205-STSDK
2021/03/21 16:34:03 00000000 s (main) Version = #41 PREEMPT Mon May 26 10:51:01 CEST 2014
2021/03/21 16:34:03 00000000 s (main) Machine = sh4
2021/03/21 16:34:03 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5128
2021/03/21 16:34:03 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2021/03/21 16:34:03 00000000 s (emu) OSCam-Emu version 738
2021/03/21 16:34:03 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2021/03/21 16:34:03 00000000 s (main) signal handling initialized
2021/03/21 16:34:03 00000000 s (config) 118 service-id's loaded in 4 ms
2021/03/21 16:34:03 00000000 s (config) 121 tier-id's loaded
2021/03/21 16:34:03 00000000 s (reader) xxxxx [cccam] creating thread for device xxxx
2021/03/21 16:34:03 00000000 s (reader) emulator [emu] creating thread for device emulator
2021/03/21 16:34:03 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2021/03/21 16:34:03 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2021/03/21 16:34:03 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2021/03/21 16:34:03 00000000 s (anticasc) anti cascading disabled
2021/03/21 16:34:03 3737E742 r (emu) Reading key file: /config/oscam/SoftCam.Key
2021/03/21 16:34:03 00000000 (emu) INFO: FFDecsa parallel mode = 32
2021/03/21 16:34:03 7A6DDA19 c (client) plain dvbapi-client granted (ufs910, au=off)
2021/03/21 16:34:03 3737E742 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2021/03/21 16:34:03 7A6DDA19 c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
2021/03/21 16:34:03 5BE3338D p (reader) xxxx: resolved ip=xxxx
2021/03/21 16:34:03 5BE3338D p (reader) xxxxxx [cccam] connecting to xxxxx
2021/03/21 16:34:03 7A6DDA19 c (dvbstapi) PTI: PTI4 open 0
2021/03/21 16:34:03 7A6DDA19 c (dvbstapi) PTI: PTI3 open 1
2021/03/21 16:34:03 7A6DDA19 c (dvbstapi) PTI: PTI2 open 2
2021/03/21 16:34:03 7A6DDA19 c (dvbstapi) PTI: PTI1 open 3
2021/03/21 16:34:03 7A6DDA19 c (dvbstapi) PTI: PTI0 open 4
2021/03/21 16:34:03 7A6DDA19 c (dvbstapi) liboscam_stapi5 v.v0.05, STPTI ID: 0xD6 initialized
2021/03/21 16:34:03 7A6DDA19 c (dvbapi) Detected /dev/stapi/stpti5_ioctl Api: 2, userconfig boxtype: 3 maximum amount of possible filters is 32 (oscam limit is 32)
2021/03/21 16:34:03 7F20D0AE h (webif) webif: decompressed 177826 bytes back into 438164 bytes
2021/03/21 16:34:03 7F20D0AE h (webif) HTTP Server running. ip=0.0.0.0 port=8080
2021/03/21 16:34:03 5BE3338D p (reader) xxxxxxx [cccam] proxy initialized, server xxxx
2021/03/21 16:34:04 3737E742 r (reader) emulator [emu] card detected
2021/03/21 16:34:05 3737E742 r (reader) emulator [emu] found card system emu
2021/03/21 16:34:05 3737E742 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2021/03/21 16:34:05 3737E742 r (emu) Reading key file: /config/oscam/SoftCam.Key

und dann ist Ende.
Egal welcher Sender

Aufs WebIF komme ich problemlos
Oscam Version

Unix starttime: 1616344443
Starttime: 21.03.2021 16:34:03
Version: oscam-1.20-unstable_svn-r11359_738
Compiler: sh4-linux-stapi5
Box type: generic (generic)
PID: 698
TempDir: /tmp/.oscam
ConfigDir: /config/oscam/
WebifPort: 8080

GBox tmp_dir: not defined using: /tmp/.oscam
value read during start up, not refreshed if changed later in webif!

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: yes
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: yes
LED support: yes
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: no
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: no
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: yes
cardreader_stinger: no

Vielleicht hat ja jemand einen entscheidenden Tipp für mich.

Vielen Dank

**** Edit

Erledigt.
Die oscam.dvbapi darf auf dem 916er nur die S - Einträge haben.