@Link nur für registrierte und freigeschaltete Mitglieder sichtbar. - vielleicht erstmal in ruhe die 'CID-Info' lesen und danach vorgehen. wenn es dann immer noch zu problemen kommt, ist möglicherweise deine sd-karte oder der computer nicht dafür geeignet. es sind einfach zu viele faktoren, die dabei eine wichtige rolle spielen um zum erfolg zu kommen. dein screenshot ist leider nicht wirklich hilfreich, man kann auf grund der zu hohen auflösung nicht viel lesen.
mfg jori...
Deine Karte passt nicht würde ich sagen
Die oem id geht nicht bin ich der Meinung
Das heißt sperren geht und entsperren dann nicht mehr?
@Link nur für registrierte und freigeschaltete Mitglieder sichtbar. - das hat nichts mit der OEM-ID zutun! wenn sie gesperrt wurde, muss sie sich auch wieder entsperren lassen. allderdings ist immer eines der gepachten linux-kernels dafür nötig. es kann aber zusätzlich noch an den verwendeten notebooks liegen. nicht alle sind für alles geeignet. bei manchen geht nur das eine, dafür aber das andere nicht..... hab ich alles schon erlebt. wenn ein 'echo erase...' auch nicht geht, liegt es mit hoher wahrscheinlichkeit am rechner?!
mfg jori...
Wie funktioniert das entsperren mit einem Nokia Handy? Nach dem einlegen der SD-Karte im Handy soll ich das PW eingeben aber man kann nur 8 Stellen eingeben.
Gruß
Das Pw Abbrechen unter Speicher auf formatieren und laufen lassen
Hello everybody, sorry but I don't speak deutch.
Jory has given me the cmd42 command.
I have locked the card with the command sudo ./mmc32 lock_sd /dev/mmcblk0 C99A20843ED7D90B6801E49F2BC80277
I would like to unlock it but it doesn't work with theses 2 commands :
- ./cmd42_32bit C99A20843ED7D90B6801E49F2BC80277 hex u /dev/mmcblk0
- ./cmd42_32bit "" asc e /dev/mmcblk0
The result is always :
I don't have sdinfo to see sdcard properties.(SD-Card cmd42 beta 0.6) 18.03.2020 22:11:01 **************
argv[0] = ./cmd42_32bit
argv[1] = C99A20843ED7D90B6801E49F2BC80277
argv[2] = hex
argv[3] = u
argv[4] = /dev/mmcblk0
password = C99A20843ED7D90B6801E49F2BC80277 length = 32
setting hex-password - length = 16
Unlock the card: password=C99A20843ED7D90B6801E49F2BC80277 ...
ERROR: No such file or directory
***********************************************************
I'm under Ubuntu 17.04 32bits
Thanks in advance for your help
@Link nur für registrierte und freigeschaltete Mitglieder sichtbar. - at first, you have to go in the root-mode. without that, 'cmd42' is not able to change system-parameter.
sudo ./cmd42 ...
and secondly, this operation also requires one of the patched custom-kernels in the background. a regular linux like ubuntu 17.04 is not prepared for this.
last but not least, your sd-card-reader should be connected via a true pci-port to increase the chance for a good result.
yours sincerely, jori...
I confirm that I have tested the command cmd42 in root mode, same result.
About the sd card reader, I have the line "/dev/mmcblk0p1 7802976 4 7802972 1% /media/sly83/0131-84EA" when I make a "df" in terminal window.
The sd card reader is integrated at my laptop Lenovo N500
About the Linux version, I understand that you suggest to install your famous version "Simply@Clever". I have understood that it's only a 64 bit version and my laptop have a 32 bits processor as aid before. Am I right ?
Thanks a lot
Is it a dvd bootable version or we must install it on hardrive ?
Bootable Version. Not necessary to install
Kr
Frabusoft
I'm back with the first results
I have made a sdinfo on my card
Then I have done the first command cmd32 in order to unlock the card(SD-Card Information v1.7) 19.03.2020 19:51:02 ************
Production-Date = 04/2016
Firmware-Revision = 0x1
Hardware-Revision = 0x0
Manufacturer-ID = 0x5d
OEM-ID = 0x5342
Serialnumber = 0x3917ca53
Product-Name = "L2BM1"
Product-Type = SD
CID = 5d53424c32424d31013917ca53010400
CSD = 400e00325b5900003bad7f800a400000
SCR = (not available)
Supported CCC = [010110110101] = 0 2 4 5 7 8 10
Card-Status = LOCKED
Card-Address = mmc0:b368 (CID may not be changeable)
***********************************************************
root@lubuntu:~# sudo cmd42 C99A20843ED7D90B6801E49F2BC80277 hex u /dev/mmcblk0
(SD-Card cmd42 beta 0.5) 19.03.2020 19:56:24 **************
argv[0] = cmd42
argv[1] = C99A20843ED7D90B6801E49F2BC80277
argv[2] = hex
argv[3] = u
argv[4] = /dev/mmcblk0
password = C99A20843ED7D90B6801E49F2BC80277 length = 32
setting hex-password - length = 16
FD = ffffffff
device = /dev/mmcblk0
FD = 00000003
ioctl: Connection timed out
Could not read 1.response to SEND_STATUS from /dev/mmcblk0
***********************************************************
Then I have done the second command cmd32 in order to make a force erease
The answer is the sameroot@lubuntu:~# sudo cmd42 "" asc e /dev/mmcblk0
(SD-Card cmd42 beta 0.5) 19.03.2020 19:58:00 **************
argv[0] = cmd42
argv[1] =
argv[2] = asc
argv[3] = e
argv[4] = /dev/mmcblk0
password = length = 0
setting ascii-password =
FD = ffffffff
device = /dev/mmcblk0
FD = 00000003
ioctl: Connection timed out
Could not read 1.response to SEND_STATUS from /dev/mmcblk0
***********************************************************
ioctl: Connection timed out
Could not read 1.response to SEND_STATUS from /dev/mmcblk0
Is the version 0.6beta of cmd42 can bring a better result ?
Thanks
Lesezeichen