Aktualisierung der Software via USB-Stick
1. Box ausschalten
2. USB-Stick FAT formatieren (FAT16)
3. das gewünschte Image oder Bootloader auf den Stick kopieren und in "usb_update.img" umbenennen!
4. Den USB Stick in die Box einstecken die Box einschalten und die "Power Taste" festhalten bis "Booting" im Display sichtbar ist.
5. Jetzt sofort die "Pfeil nach oben Taste" drücken und festhalten bis "USB Upgrade" im Display sichtbar ist.
6. Alle Tasten jetzt loslassen. In ersten Augenblick passiert garnichts es dauert bis zu einer Minute. bis der Flashvorgang startet.
7. Flasvorgang ist beendet wenn "DONE" im Display erscheint ,
WICHTIG: die Box nicht vom Netzt trennen bevor "DONE" erscheint! Spezielle beim Bootloader-Update!
Weil es so easy ist gibt es noch ein nettes Video dazu
Fehlercodes
Err 1 - Error CRC - check the image
Err 2 - Error CRC - check the image
Err 3 - ID Seller Non correspondent - check the image
Err 4 - Product ID Not correspondent - check the image
Err 5 - Name Model H / W Not correspondent - check the image
Err 6 - Version Model H / W Not correspondent - check the image
Err 8 - Erase (cancellation) Fail - Contact Center
Err 9 - Flashing (writing) Fail - Contact Center
Err 10 - File not found (usb_update.img)
Err 79 - Version db (settings) are not correct - update settings to correct version (with a flashing image that contains the db)
Err 80 - of Problem communication CPU / Motherboard - contact the service center
Err 81 - of Problem communication CPU / Motherboard - contact the service center
Err 82 - Tuner not properly inserted - Remove the power and check the installation of the tuner
Err 83 - Tuner not properly inserted - Remove the power and check the installation of the tuner
Hinweis zu Err 10:
1. Anzeige der Dateiendung bei Windows beachten (usb_update.img.img)
2. anderen USB Stick versuchen
Lesezeichen