sorry, ich musste erst mal alles neben hin legen sonst hätte ich sie durchs geschlossene Fenster gefeuert.
Ich habs etzt nochmal probiert. Ich hab dreamup 1.3.3.2-1.3.3.6 ausprobiert, wenn ich sie dann verbinde lädt er den flash loader hoch zur box gibt mir dann aber die Fehlermeldung "Keine CA vom secondstage loader gefunden, bitte setzen Sie sich mit dem Dream-Multimedia Support in Verbindung" dann habe ich den loader von Japhar genommen da macht er es anständig und ich kann entweder den ssl oder das image flashen. Er sagt mir dann auch das der upload ok war.Wenn ich den ssl geladen habe kann ich auch sofort ins Webinterface ohne vorher im Stop Modus zu starten und es lässt sich das image erfolgreich aufspielen. Wenn ich dann die Box reboote kommt wieder die error meldung und die blinkende LED......
Ich gehe da immer folgendermaßen vor.
1. Den SSL per Japher flashen, wenn das gemacht wurde, die Box runterfahren.
2. Per Webbrowser dann das passende Image flashen.
Du musst sicherlich beides von Japhar laden, Image und SSL. Die originale Software von Dream testet die SIM und hat dann keinen Bock mehr. Die Japhar-Leute haben diesen Test ausgebaut. An solchem Zeug hängst du mit einer Clone-Box nun mal. Das Original ist damit tabu!
Einfach nur schöner fernsehen. "Geht nicht" gibt's nicht.
Wenn die richtige SSL passend zur Box drauf ist, dann kann man ein Image wieder per Webbrowser flashen,
da die Box ja wieder eine IP bekommt. Image flashen per Japher dauert ca. 1 Stunde.
@Link nur für registrierte und freigeschaltete Mitglieder sichtbar.
Hier noch ein newnigma2 E-Star Image hochgeladen
Link nur für registrierte und freigeschaltete Mitglieder sichtbar.
Mehr kann ich nicht mehr für dich tun und bin dann hier auch raus,
denn die ganze Arbeit für so eine alte Box mit nur 64mb Flashspeicher lohnt sich die Arbeit nicht.
Für 60 bis 100 Euro bekommt man eine gute E2 Box!
Beitrag#22 gelesen, da schreibt er welche Sim verbaut ist!
Geändert von sh4w (16.03.2021 um 15:46 Uhr)
"Menschen, die recht haben, stehen meistens allein."
Danke für den Download, aber vielleicht sollest du noch dabei schreiben für welche Sim das ist. MfG
Latest DM800HDpvr DRIVERS 20131228-OE2.0-2-g9d9e640
Latest DM available drivers for DM800HDpvr, now available for Japhar
DM800HD_20131228-OE2.0-2-g9d9e640_by_Japhar (included OS v6)
Japhar Sim required
Tutorial
1) Reflash your Sim with the latest Japhar OS v6 (See attachment)
2) Replace in your image the extra folder files with the attached new driver files
(in /lib/modules/2.6.18-7.4-dm800/extra)
- IPK to autoflash sim in box to Japhar v6
enigma2-plugin-japhar-flashing-sim-nc3-v6_dm800hdpvr-1.0_all.ipk
Link nur für registrierte und freigeschaltete Mitglieder sichtbar.Code:How to Flash the Japhar Sim to OS v6 ? 1) Download the Archive (RAR file) of the Box version. See links below. 2) Extract the files from it and you will have 3 different ways to flash the Sim to the new Japhar OS v6. BEFORE APPLYING THE SIM OS UPGRADE BE SURE ALL CAM ARE DEACTIVATED ! Set CAM to "Common Interface" mode. Best TIP : Install brand new image OpenPLi for Sim Upgrade via JAM. a) Use JAM 5.x, leaving the sim in the box and launching the LIVE upgrade of the sim Japhar in the box. - Select the first option of JAM : "Japhar addons Manager Come To Our FORUM" - Select then the box sim upgrade : "Japhar Sim Card Flashing DMxxxxx v6" - Let the box flash the sim itself, with 2 reboots and at least 5 minutes of work to do the whole job. Remark : The JAM way to work will need to have a Kernel 3.2 image, like OpenPLi installed in the box (NOT Kernel 2.6). OR b) Install the ipk file (same as the one from JAM), that will reflash the box with 2 reboots and 5+ minutes for the job. AGAIN you need a Kernel 3.2 image here for the ipk to be successful (only for DM800HD Kernel 2.6). OR c) Get the .bat, .exe and .nc3 files in your PC, and with a GCR2 Programmer to flash the sim directly with your PC. You could need to launch the .bat file twice as on XP once is enough, but Win7+ it will need two as the second will show a lot of numbers and be a successful second pass programming. 3) You will have now your Sim compatible with all images v6, and for DM800HDpvr/DM800HDseV1/DM8000HD will be compatible with v3-v5 images. For DM800HDseV2 images v6 will work BUT NOT v5 that will need flashing the new SSL89-v6.
- - - - - - - - - -
Das ist nur für sim 3
von Miese.Ratte
Spoiler zu Link ergänzt.
Geändert von sh4w (17.03.2021 um 16:06 Uhr)
"Menschen, die recht haben, stehen meistens allein."
@Link nur für registrierte und freigeschaltete Mitglieder sichtbar. :
Du solltest dir dringend die Forenregeln bezüglich der Links anschauen!
Werbung - gleich welcher Art - und somit auch Verweise (Links) auf andere Internet-Werbeinhalte oder gewerbliche Seiten (Satshops, Auktionshäuser…), sowie zu anderen ULCs (Uploadcentern) oder Internetforen, ist nicht erlaubt.Links zu Filehostern: OK (bitte zwingend die Spoiler-Funktion nutzen)
Einfach nur schöner fernsehen. "Geht nicht" gibt's nicht.
Für eine Dm800 HD hat Sh4w und ich ja was hochgeladen.
Sicher das du eine DM800 HD hast?
Geändert von hammer2323 (16.03.2021 um 18:08 Uhr)
Lesezeichen