Thema: Unibox Eco+ mit Agonis Image, bleibt nach dem abspielen einer Aufnahme in einer Ladeschleife hängen

Hallo, mein Unibox Eco+ mit Agonis Image, bleibt nach dem abspielen einer Aufnahme in einer Ladeschleife hängen.

So das nichts mehr geht und mir nur das ziehen des Stromanschlusses übrigbleibt.

Habe die Box auch schon mit den neuem Bootloader HD eco+ vom 22.08.2014 und anschließend mit dem neuem Agonis Image agonis-4.1-uniboxhde-20140827_usb vom 28.08.2014 geflasht.

Das Problem war immer noch da.

Da ich dies bezüglich hier noch nichts gefunden habe ,frage ich mich woran es liegen könnte und ob hier jemand Ahnung bzw. Lösung hat?

Schon mal Danke im Voraus mit freundlichen Grüßen



binda

Welche Festplatte ist verbaut ?

Hallo, also ich teste das seit gestern rauf und runter. Kein Crash.
Wenn der bei euch ist bitte in /tmp den Crashlog hier posten. Dann sieht man was da los ist.
Wie stopt Ihr die Aufnahme ? Genau Reihenfolge damit man das nachvollziehen kann.

Teste das bitte mal mit Agonis. Ohne Crashlog wird das aber recht schwierig. Hast du noch andere Plugins installiert?

Hallo randysoft! Danke für deine Mühe. Es ist das Agonis-Image, nur mit einem Pli-Skin obendrauf. Es funktioniert aber auch mit dem originalen Skin und nach einem komplett neu Flashen mit den letzten beiden Images nicht. Zusätzliche Erweiterungen - außer MediaCenter, um zu testen ob nur der Standard-Mediaplayer spinnt - sind nicht installiert. Ich hab gestern mal ein Debug-Log erstellt und da steht am Schluss als letzter Eintrag ein Ereignis, das scheinbar auch bei anderen Boxen zum Crash führt.

ERROR: accelAlloc failed[SCREENNAME] ['MC_VideoPlayer_summary', 'SimpleSummary']
[SCREENNAME] MC_VideoPlayer
0 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:13.621390
close frontend 0
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:14.967478
action -> MC_VideoPlayerActions down
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:15.190282
1 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:16.067175
action -> MC_VideoPlayerActions ok
/media/hdd/movie/20140901 1706 - RTLNITRO - Walker, Texas Ranger.ts
warning, skin is missing element eventname in <class 'Screens.PVRState.PVRState'>
warning, skin is missing element statusicon in <class 'Screens.PVRState.PVRState'>
warning, skin is missing element speed in <class 'Screens.PVRState.PVRState'>
RemovePopup, id = ZapError
playing 1:0:0:0:0:0:0:0:0:0:/media/hdd/movie/20140901 1706 - RTLNITRO - Walker, Texas Ranger.ts
alloc PVR
allocate demux
loading streaminfo for /media/hdd/movie/20140901 1706 - RTLNITRO - Walker, Texas Ranger.ts
cuts file has 2 entries
[@ML] m_streaminfo.getLastFrame returned 212064, 7687920936 (85421s), fixup to: 212064, 51532 (0s)
setIoPrio best-effort level 0 ok
FILEPUSH THREAD START
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00ad), and 1 audio stream(s) (0092), and the pcr pid is 00ad, and the text pid is 0054
decoder state: play, vpid=173, apid=146
DMX_SET_PES_FILTER(0x92) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux4
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xad) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x54) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
main thread is non-idle! display spinner!
setPixmapNum(0) failed! defined pixmaps: []
[SCREENNAME] PVRState
eDVBServicePlay::seekTo: jump 0
seek.
FILEPUSH waiting for pause
FILEPUSH THREAD PAUSED
AUDIO_CLEAR_BUFFER - ok
VIDEO_CLEAR_BUFFER - ok
ok, resolved skip (rel: 0, diff 0), now at 00000000
RemovePopup, id = ZapError
eDVBServicePlay::unpause
setPixmapNum(0) failed! defined pixmaps: []
[SCREENNAME] PVRState
setPixmapNum(0) failed! defined pixmaps: []
[SCREENNAME] PVRState
RemovePopup, id = ZapError
warning, skin is missing element key_blue in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element speed in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element statusicon in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element state in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element key_green in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element eventname in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element key_yellow in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MoviePlayer'>
warning, skin is missing element statusicon_summary in <class 'Screens.InfoBarGenerics.InfoBarMoviePlayerSummary'>
[SCREENNAME] InfoBarMoviePlayerSummary
[SCREENNAME] MoviePlayer
setPixmapNum(6) failed! defined pixmaps: []
[SCREENNAME] PVRState
0 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:20.864032
[Dish] tuning failed
eDVBChannel: pvrEvent evtStopped
VIDEO_GET_EVENT - ok
ERROR reading PES (fd=51) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 51(8)
PATready
use pmtpid 0035 for service_id 2f1d
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: letterbox
eventNewProgramInfo 0 0
have 1 video stream(s) (00ad), and 1 audio stream(s) (0092), and the pcr pid is 00ad, and the text pid is 0054
decoder state: play, vpid=173, apid=146
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:15:30.177740
action -> MoviePlayerActions leavePlayerOnExit
[SCREENNAME] ['MC_VideoPlayer_summary', 'SimpleSummary']
playing None
eFilePushThread stopping thread
FILEPUSH THREAD STOP
thread joined 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
[SCREENNAME] MC_VideoPlayer
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:15:30.427658
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:15:34.364086
action -> MC_VideoPlayerActions cancel
[SCREENNAME] ['DMC_MainMenu_summary', 'SimpleSummary']
[SCREENNAME] DMC_MainMenu
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:15:34.564258
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:36.294781
action -> DirectionActions left
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:36.363513
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:37.928331
action -> DirectionActions left
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:38.023322
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:39.123406
action -> DirectionActions left
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:39.209452
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:40.438437
action -> DirectionActions left
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:40.526906
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:41.248340
action -> DirectionActions left
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-02 07:15:41.332820
1 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:42.349117
action -> OkCancelActions ok
warning, skin is missing element key_blue in <class 'Plugins.Extensions.BMediaCenter.MC_AudioPlayer.MC_WebRadio'>
[SCREENNAME] ['MC_WebRadio_summary', 'SimpleSummary']
[SCREENNAME] MC_WebRadio
[Picload] setPara max-X=1280 max-Y=720 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
0 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:42.733949
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:44.390640
action -> MC_AudioPlayerActions down
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:44.407777
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:46.165550
action -> MC_AudioPlayerActions down
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:46.182839
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:46.770570
action -> MC_AudioPlayerActions down
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-02 07:15:46.789587
1 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:47.420297
action -> MC_AudioPlayerActions ok
playing 4097:0:0:0:0:0:0:0:0:0:http%3a//gbs01.de%3a7220
getResolvedKey config.mediaplayer.useAlternateUserAgent failed !! (Typo??)
getResolvedKey config.mediaplayer.extraHeaders failed !! (Typo??)
RemovePopup, id = ZapError
eServiceMP3::state transition NULL -> READY
0 160 1
KEY: 352 KEY_OK OK 2014-09-02 07:15:47.620066
eServiceMP3::state transition READY -> PAUSED
eServiceMP3::async-done - 0 video, 1 audio, 0 subtitle
AUDIO STRUCT=audio/mpeg
eServiceMP3::audio stream=0 codec=MPEG 1 Audio, Layer 3 (MP3) language=und
eServiceMP3::state transition PAUSED -> PLAYING
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/BMediaCenter/saver/2.jpg
accel alloc failed


ERROR: accelAlloc failed
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:15:58.745743
action -> MC_AudioPlayerActions cancel
[Picload] decode thread ... got quit msg
thread joined 0
eServiceMP3::stop Link nur für registrierte und freigeschaltete Mitglieder sichtbar.
[SCREENNAME] ['DMC_MainMenu_summary', 'SimpleSummary']
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:15:59.144600
[SCREENNAME] DMC_MainMenu
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:16:01.531924
action -> OkCancelActions cancel
umount: can't umount /media/upnp: No such file or directory
playing 1:0:19:7F:85:C00000:0:0:0:
RemovePopup, id = ZapError
allocate channel.. 000d:0085
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11992500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1392 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:7F:85:C00000:0:0:0:
allocate demux
[SCREENNAME] MenuSummary
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-02 07:16:01.941649
[SEC] set static current limiting
[SCREENNAME] ['menu_mainmenu', 'Menu']
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2583d00 running
[eEPGCache] channel 0x2583d00 running
[EPGC] next update in 58 min
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (02ff), and 1 audio stream(s) (0303), and the pcr pid is 02ff, and the text pid is 0020
allocate demux
decoder state: play, vpid=767, apid=771
DMX_SET_PES_FILTER(0x2ff) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x303) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x2ff) - video - ok
DEMUX_START - video - main thread is non-idle! display spinner!

Hallo,
bei mir ist es Haargenau, wie bei raymoon!
Und wenn ich es richtig verstanden habe funktioniert es bei randysoft alles normal?!
Nutzt du auch eine SKY-C+ Modul?
Wie sind deine Festplatten einstellung?

Ich habe meine HDD nur normal Initialisiert!
Habe auch andere MediaPlayer runtergeladen, das gleiche Problem.

P.S. es kann doch nicht sein dass das Problem nur zwei Leute haben ?

Hallo binda! Ich hab mit Ext3 formatiert, zu Ext4 konvertiert, die Filme in verschiedenen Verzeichnissen gespeichert, die Aufnahmetypen geändert, vor dem Abspielen einen FreeTv Kanal, alternativ auch einen Sky-Kanal eingeschaltet, beide Programmtypen aufgenommen, beide auch problemlos über ein Netzwerkshare am PC mit VLC abgespielt. Es liegt meiner Meinung nach weder an der Platte noch am Sky CI+ Modul.
Mein Log zeigt: Ich spiele ein Video von RTL NITRO im MediaCenter ab, wechsle dann noch auf einen Webradio-Stream. Soweit alles OK. Ich verlasse das MediaCenter und die Box versucht auf das letzte TV-Programm zurück zu wechseln. Audio initialisiert - Video? Bumm! und Tschüss...
lG, raymoon

wenn der spinner steht sieht man den fehler im e2 log nicht

bitte per telnet auf die box und folgendes eingeben

dmesg

ich denke da ist ein treiber crash enthalten

Bitte sehr:

console [ttyS0] enabled, bootconsole disabledserial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
sata_brcmstb 0000:01:00.0: version 4.0
__clk_enable: sata [1]
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
sata_brcmstb 0000:01:00.0: setting latency timer to 64
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
NOR chip too large to fit in mapping. Attempting to cope...
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Reducing visibility of 8192KiB chip to 2048KiB
Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on "Broadcom 9xxxx mapped flash":
0x000000000000-0x000000400000 : "avail0"
0x000000400000-0x000000480000 : "cfe"
0x000000480000-0x0000007e0000 : "splash"
0x0000007e0000-0x0000007f0000 : "macadr"
0x0000007f0000-0x000000800000 : "nvram"
0x000000000000-0x000000800000 : "Norcomplete"
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:25:ff:05:5a:2d)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
sda: sda1
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=18152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=01d3d195
After: NandSelect=50000200, nandConfig=18152300
Block size=00020000, erase shift=17
NAND Config: Reg=38152300, chipSize=1024 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
eccLevel=15, 1Ksector=0, oob=16
nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
BrcmNAND mfg 1 d3 SPANSION_S30ML08GP_08 1024MB on CS1


Found NAND on CS1: ACC=d7ff1010, cfg=38152300, flashId=01d3d195, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 1024MB @00000000
B4: NandSelect=50000200, nandConfig=38152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=01d3d195
After: NandSelect=50000200, nandConfig=38152300
Found NAND flash on Chip Select 1, chipSize=1024MB, usable size=1024MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0007ffc0, version 0x02 for chip on CS1
Bad block table 1tbB found at page 0007ff80, version 0x02 for chip on CS1
nand_read_bbt: Bad block at 0x224a0000
nand_read_bbt: Bad block at 0x28120000
nand_read_bbt: Bad block at 0x281c0000
nand_read_bbt: Bad block at 0x3ff80000
nand_read_bbt: Bad block at 0x3ffa0000
nand_read_bbt: Bad block at 0x3ffc0000
nand_read_bbt: Bad block at 0x3ffe0000
Adjust partition Nandcomplete size from entire device to 3ff80000 to avoid overlap with BBT reserved space
Creating 4 MTD partitions on "brcmnand.0":
0x000000600000-0x00003ff00000 : "rootfs"
0x000000600000-0x00003ff00000 : "rootfs(redundant)"
0x000000000000-0x000000600000 : "kernel"
0x000000000000-0x00003ff80000 : "Nandcomplete"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd6 to ubi0
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 4 SControl 300)
UBI: scanning is finished
UBI: attached mtd6 (name "rootfs", size 1017 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 8133, bad PEBs: 3, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 132322632
UBI: available PEBs: 0, total reserved PEBs: 8133, PEBs reserved for bad PEB handling: 157
UBI: background thread "ubi_bgt0d" started, PID 52
ALSA device list:
No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 53
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 1010855936 bytes (964 MiB, 7961 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID A827328B-66BF-4AB1-9485-1FCBF6B890E7, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 268k freed
EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
core: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
Creating main VDC heap: SD 10, HD 0, 2HD 8, SD_PIP 0, HD_PIP 0, 2HD_PIP 0
===MODEL[HDE]======
LinuxDVB Driver Date (30/07/14)
LinuxDVB cimax initial completei 41
DVB: registering new adapter (linuxdvb-0)
DVBT2C Tuner is not connected
[check_stv0913_Demod]==== Failed
(NULL device *): DVB: registering adapter 0 frontend 0 (STV0900 DVB-S2)...
internaltunerCnt 0 name linuxdvb-0 adapter0
DVB: registering new adapter (linuxdvb-1)
DVBT2C Tuner is not connected
(NULL device *): DVB: registering adapter 1 frontend 1 (STV0900 DVB-S2)...
internaltunerCnt 1 name linuxdvb-1 adapter1
DVB: registering new adapter (linuxdvb-2)
[Virtual tuner0: register
DVB: registering new adapter (linuxdvb-3)
[Virtual tuner1: register
DVB: registering new adapter (linuxdvb-4)
input: UBIOX advanced remote control (native)
as /devices/virtual/input/input0
register dbox FP RTC device !
NET: Registered protocol family 10
svc: failed to register lockdv1 RPC service (errno 124).
[set_resolution] vid_res 1080i50
[set_resolution] vid_res 1080i50
[set_resolution] vid_res 1080i50
CAM0 validated successfully
Flush DVR
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == e090dfc4, ra == e090edc0
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008700 e090dfc4 00000001
$ 4 : 00000000 00000008 0000028a 00000001
$ 8 : 00000001 00000000 00000004 00000002
$12 : 00000002 cf4b4334 00000000 000100ff
$16 : e0ea0c30 e0ea0c68 ce267cd8 e0ea0c58
$20 : 00000000 e0ea5138 e0ea0c48 00001134
$24 : 00000000 e093b90c
$28 : ce266000 ce267bf0 00000000 e090edc0
Hi : 00000227
Lo : 0006e569
epc : e090dfc4 NEXUS_Security_RemovePidChannelFromKeySlot_impl+0x0/0x50 [core]
Tainted: GF O
ra : e090edc0 NEXUS_Security_RemovePidChannelFromKeySlot+0x30/0x50 [core]
Status: 10008703 KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId : 0002a044 (Brcm4380)
Modules linked in: ipv6 core(OF)
Process enigma2 (pid: 460, threadinfo=ce266000, task=ce203b08, tls=778a5490)
Stack : cfeb1000 cfee2000 ce156a80 000000ff 00000000 00000008 e0e9d324 e08adfac
00000800 807ae640 00000000 ce267ea8 00000000 ffffffff 00000000 00000101
00000000 00000001 000000ff 00000008 00000004 00000002 00000002 000100ff
0000ffff 00000000 00000000 ffffffff 00000000 00000101 00000000 00000001
00000000 00000001 00000000 8004e384 e0e9d324 e10123c0 00000004 e0e9d5dc
...
Call Trace:
[<e090dfc4>] NEXUS_Security_RemovePidChannelFromKeySlot_impl+0x0/0x50 [core]
[<e090edc0>] NEXUS_Security_RemovePidChannelFromKeySlot+0x30/0x50 [core]
[<e08adfac>] dvb_dmx_add_ts_filter+0x798/0x9f8 [core]
[<e08a841c>] dvb_dmx_start_feed+0x144/0x28c [core]
[<80502234>] dmx_ts_feed_start_filtering+0x60/0x134
[<804fecf0>] dvb_dmxdev_start_feed.isra.2+0xd0/0x148
[<804ff910>] dvb_dmxdev_filter_start+0x9c/0x420
[<80500358>] dvb_demux_do_ioctl+0x16c/0x644
[<804fd8ec>] dvb_usercopy+0x64/0x1d0
[<800dc194>] do_vfs_ioctl+0x43c/0x624
[<800dc3cc>] sys_ioctl+0x50/0xb4
[<8000e4c8>] stack_done+0x20/0x44




Code: 8fb00034 03e00008 27bd0040 <8c820000> 27bdffc8 8c830004 3c04e0ed afa20018 8c84625c
---[ end trace 61239407730dafdd ]---

Saboteur gefunden. Es ist .... das SKY CI+ Modul. Ohne Modul im Schacht kein Absturz nach der Filmwiedergabe. Total unlogisch, weil das Abspielen einer x-beliebigen Aufnahme etwa der ARD oder von arte gar nichts mit dem CI Modul zu schaffen hat. 'Ne tolle Schlagzeile: "SKY Modul setzt Receiver Schach matt, die vorgaukeln CI+ zertifiziert zu sein."

nein das ist es nicht. Es kommt in Kürze ein Update.

Wann? mir ist es auch beim ATVImage vorgekommen nach dem ich Sky hell hatte!

Im Lauf der nächsten Woche - schau immer wieder nach auf egami.to