USB Support
►► Disabled ........All USB devices are disabled before the OS boot process completes.
►► Full Initial ....All USB devices are functional in the operating system and during the POST.
►► Partial Initial .Part of the USB devices are disabled before the OS boot process completes. (Default)
This item is configurable only when Fast Boot is set to Enabled. This item is disabled when Fast Boot is set to Ultra Fast.
PS2 Devices Support
►► Disabled ........All PS/2 devices are disabled before the OS boot process completes.
►► Enabled .........All PS/2 devices are functional in the operating system and during the POST. (Default)
This item is configurable only when Fast Boot is set to Enabled. This item is disabled when Fast Boot is set to Ultra Fast.
Das bedeutet in etwa:
USB Unterstützung
►► Disabled ........Alle USB Anschlüsse sind abgeschaltet bis der Start des Betriebssystems abgeschlossen ist.
►► Full Initial ....Alle USB Anschlüsse funktionieren im Betriebssystem und während des Einschaltselbsttestes. (Standardeinstellung)
►► Partial Initial .Einige der USB Anschlüsse sind abgeschaltet bevor das Betriebssystem komplett gestartet ist. (Dies ist die Standardeinstellung, welche nach einem Bios-Reset oder bei Auswahl von 'Load Setup Default' aktiv ist)
Dieser Punkt kann nur dann konfiguriert werden wenn Fast Boot auf Enabled gestellt ist. Dieser Punkt ist abgeschaltet wenn Fast Boot auf Ultra Fast gestellt ist.
PS2 Geräte Unterstützung
►► Disabled ........Alle PS/2 Anschlüsse sind abgeschaltet bis der Start des Betriebssystems abgeschlossen ist.
►► Enabled .........Alle PS/2 Anschlüsse funktionieren im Betriebssystem und während des Einschaltselbsttestes. (Default)
Dieser Punkt kann nur dann konfiguriert werden wenn Fast Boot auf Enabled gestellt ist. Dieser Punkt ist abgeschaltet wenn Fast Boot auf Ultra Fast gestellt ist.
Auf Seite 29 steht noch unter 'Periphals':
Legacy USB Support
►► Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
- Damit funktioniert eine USB-Tastatur/Maus auch unter MS-Dos. (Standardeinstellung: Enabled)
<Verstecken Ende>
Lesezeichen