Thema: Ich möchte doch nur die Privaten in HD...

Zitat von marcmd

Unterer Slot, Chip nach unten.

- geht doch ...

Code:

(reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
...
(reader) reader0_hd+_hd02 [internal] found card system nagra
... 
(reader) reader0_hd+_hd02 [nagra] active to: 2017/03/10 01:37

Dann sollte HD+ auch hell werden, warst du mal auf einem HD+ Sender?

Jetzt noch das, oder nicht?

Code:

(cccam) line_cccam configuration error!

Nun stellt sich noch ein Problem.
Sobald ich die Guide Funktion aufzurufen versuche, um zum Beispiel eine Aufnahme zu programmieren, stürzt der Receiver ab und startet neu und teilt mir mit, ich solle die Datei enigma2_crash_xyz an den Hersteller schicken.

Deren Inhalt ist das hier:

<?xml version="1.0" encoding="utf-8"?>
<openATV>
<enigma2>
<crashdate>So Jan 8 15:17:41 2017</crashdate>
<compiledate>Dec 29 2016</compiledate>
<contactemail>forum at www.opena.tv</contactemail>
<!-- Please email this crashlog to above address -->
<skin>MetrixHD/skin.xml</skin>
<sourcedate>2016-12-29</sourcedate>
<version>5.3</version>
</enigma2>
<image>
<stbmodel>triplex</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux triplex 4.7.6 #1 SMP Thu Oct 6 11:02:12 CEST 2016 mips GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline>ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=240M@16M bmem=256M@512M console=ttyS0,115200n8</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<=!=[=C=D=A=T=A=[
box_type=triplex
build_type=0
version=5.3
build=0
date=20161203234532
comment=openATV
target=9
creator=openATV
url=http://www.opena.tv
catalog=http://www.opena.tv
]=]=>
</imageversion>
<imageissue>
<=!=[=C=D=A=T=A=[
Welcome to openATV for %h
openatv 5.3 %h


]=]=>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
ffffffff
15:17:00.633 [ ] dvb/frontend.cpp:2382 prepare_sat frontend 0 prepare_sat System 1 Freq 11464000 Pol 0 SR 22000000 INV 0 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
15:17:00.633 [ ] dvb/frontend.cpp:2388 prepare_sat tuning to 1714 mhz
15:17:00.633 [ ] dvb/dvb.cpp:1722 frontendStateChanged OURSTATE: tuner 0 tuning
15:17:00.633 [ ] dvb/pmt.cpp:785 tuneExt allocate Channel: res 0
15:17:00.633 [ ] dvb_ci/dvbci.cpp:898 addPMTHandler [eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:
15:17:00.634 [ ] dvb/dvb.cpp:1038 allocateDemux allocate demux
15:17:00.679 [ E ] service/servicedvb.cpp:193 getName eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
15:17:00.729 { } Components/Network.py:689 calc_netmask cidr invalid: 64
15:17:00.730 { } Components/Network.py:689 calc_netmask cidr invalid: 64
15:17:00.732 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
15:17:00.732 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 44(16)
15:17:00.733 { } Components/Console.py:40 eBatchCB [eBatch] retval=0, cmds left=2, data:
15:17:00.733 { } Components/Console.py:40 eBatchCB
15:17:00.734 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
15:17:00.743 { } Components/Task.py:375 jobDone job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
15:17:00.756 [ ] dvb/frontend.cpp:1857 tuneLoopInt [SEC] set static current limiting
15:17:00.756 [ ] dvb/frontend.cpp:1806 tuneLoopInt [SEC] invalidate current switch params
15:17:00.757 [ ] dvb/frontend.cpp:1526 tuneLoopInt [SEC] tuner 0 setVoltage 2
15:17:00.758 [ ] dvb/frontend.cpp:1517 tuneLoopInt [SEC] tuner 0 sleep 10ms
15:17:00.768 [ ] dvb/frontend.cpp:1816 tuneLoopInt [SEC] update current switch params
15:17:00.769 [ ] dvb/frontend.cpp:1628 tuneLoopInt [SEC] tuner 0 startTuneTimeout 5000
15:17:00.769 [ ] dvb/frontend.cpp:1621 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
15:17:00.769 [ ] dvb/frontend.cpp:2028 setFrontend setting frontend 0 events: on
15:17:00.769 [ ] dvb/frontend.cpp:791 feEvent (0)fe event: status 0, inversion off, m_tuning 1
15:17:00.770 [ ] dvb/frontend.cpp:1517 tuneLoopInt [SEC] tuner 0 sleep 500ms
15:17:00.779 { } Components/Network.py:125 routeFinished 0.0.0.0
15:17:00.780 { } Components/Network.py:125 routeFinished 192.168
15:17:00.815 { E } plugin/controllers/SR.py:24 __init__ SerienRecorder plugin not found
15:17:00.816 { E } plugin/controllers/ER.py:23 __init__ EPG Refresh Plugin not found
15:17:00.818 { } plugin/httpserver.py:156 buildRootTree [OpenWebif] no plugins to load
15:17:00.822 { } plugin/httpserver.py:177 HttpdStart [OpenWebif] started on 80
15:17:00.823 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
15:17:00.846 { } Plugins/Extensions/Infopanel/CamStart.py:93 timerEvent [CAMSTARTER] Start/Check: 1
15:17:00.966 { } Plugins/Extensions/Infopanel/CamStart.py:137 timerEvent 2017-01-08 15:17:00.966257
15:17:00.967 { } Plugins/Extensions/Infopanel/CamStart.py:138 timerEvent [CAMSTARTER] CAM 1 is Running, active cam 1: oscam_atv 1.2 11214
15:17:00.967 { } Plugins/Extensions/Infopanel/CamStart.py:187 timerEvent [CAMSTARTER] Cam is running, exit camstarter
15:17:01.080 [ ] dvb/frontend.cpp:791 feEvent (0)fe event: status 1f, inversion off, m_tuning 2
15:17:01.080 [ ] dvb/dvb.cpp:1718 frontendStateChanged OURSTATE: tuner 0 ok
15:17:01.080 [ ] dvb/dvbtime.cpp:588 DVBChannelStateChanged [eDVBLocalTimerHandler] channel 0x1236ef8 running
15:17:01.081 [ ] dvb/epgcache.cpp:644 DVBChannelStateChanged [eEPGCache] channel 0x1236ef8 running
15:17:01.082 [ ] dvb/dvb.cpp:1333 DVBChannelStateChanged stop release channel timer
15:17:01.082 [ ] dvb/pmt.cpp:67 channelStateChanged ok ... now we start!!
15:17:01.082 [ ] service/servicedvb.cpp:1218 serviceEvent eventNewProgramInfo 0 0
15:17:01.082 < > service/servicedvb.cpp:2787 updateDecoder have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
15:17:01.082 [ ] dvb/dvb.cpp:1038 allocateDemux allocate demux
15:17:01.084 [ ] dvb/epgcache.cpp:1854 startChannel [EPGC] next update in 2 sec
15:17:01.123 [ ] service/servicedvb.cpp:3474 setAC3Delay Setting audio delay: setAC3Delay, 0 + 0
15:17:01.156 [ ] service/servicedvb.cpp:3485 setPCMDelay Setting audio delay: setPCMDelay, 0 + 0
15:17:01.156 [ ] dvb/decoder.cpp:829 setState decoder state: play, vpid=511, apid=515
15:17:01.156 < > dvb/decoder.cpp:702 startPid DMX_SET_PES_FILTER(0x1ff) - pcr - ok
15:17:01.156 < > dvb/decoder.cpp:710 startPid DEMUX_START - pcr - ok
15:17:01.156 < > dvb/decoder.cpp:84 startPid DMX_SET_PES_FILTER(0x203) - audio - ok
15:17:01.157 < > dvb/decoder.cpp:92 startPid DEMUX_START - audio - ok
15:17:01.157 < > dvb/decoder.cpp:138 startPid AUDIO_SET_BYPASS(0) - ok
15:17:01.157 < > dvb/decoder.cpp:191 freeze AUDIO_PAUSE - ok
15:17:01.157 < > dvb/decoder.cpp:146 startPid AUDIO_PLAY - ok
15:17:01.181 [ ] dvb/decoder.cpp:267 eDVBVideo Video Device: /dev/dvb/adapter0/video0
15:17:01.181 [ ] dvb/decoder.cpp:274 eDVBVideo demux device: /dev/dvb/adapter0/demux0
15:17:01.181 < > dvb/decoder.cpp:354 startPid VIDEO_SET_STREAMTYPE 1 - ok
15:17:01.181 < > dvb/decoder.cpp:389 startPid DMX_SET_PES_FILTER(0x1ff) - video - ok
15:17:01.181 < > dvb/decoder.cpp:397 startPid DEMUX_START - video - ok
15:17:01.181 < > dvb/decoder.cpp:458 freeze VIDEO_FREEZE - ok
15:17:01.181 < > dvb/decoder.cpp:412 startPid VIDEO_PLAY - ok
15:17:01.187 < > dvb/decoder.cpp:779 startPid DMX_SET_PES_FILTER(0x21) - ttx - ok
15:17:01.187 < > dvb/decoder.cpp:787 startPid DEMUX_START - ttx - ok
15:17:01.192 < > dvb/decoder.cpp:482 setSlowMotion VIDEO_SLOWMOTION(0) - ok
15:17:01.192 < > dvb/decoder.cpp:497 setFastForward VIDEO_FAST_FORWARD(0) - ok
15:17:01.192 < > dvb/decoder.cpp:470 unfreeze VIDEO_CONTINUE - ok
15:17:01.192 < > dvb/decoder.cpp:203 unfreeze AUDIO_CONTINUE - ok
15:17:01.192 < > dvb/decoder.cpp:222 setChannel AUDIO_CHANNEL_SELECT(0) - ok
15:17:01.194 [ ] dvb/teletext.cpp:640 setPageAndMagazine disable teletext subtitles page ffffffffffffffff (und)
15:17:01.217 { } Plugins/Extensions/Volume_adjust/plugin.py:468 __evUpdatedInfo [Volume Adjust] Update Info
15:17:01.217 { } Plugins/Extensions/Volume_adjust/plugin.py:472 __evUpdatedInfo [Volume Adjust] Volume = 50
15:17:01.218 { } Plugins/Extensions/Volume_adjust/plugin.py:446 loadXML [Volume Adjust] load xml...
15:17:01.218 { } Plugins/Extensions/Volume_adjust/plugin.py:483 __evUpdatedInfo [Volume Adjust] New Channel
15:17:01.219 { } Plugins/Extensions/Volume_adjust/plugin.py:488 __evUpdatedInfo [Volume Adjust] oldvol = 0
15:17:01.231 [ ] dvb/cahandler.cpp:263 registerService [eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
15:17:01.231 [ ] dvb/cahandler.cpp:281 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
15:17:01.255 [ E ] service/servicedvb.cpp:1783 timeshift statfs failed!
15:17:01.304 { E } Tools/Notifications.py:36 RemovePopup RemovePopup, id = ZapError
15:17:01.313 [ ] dvb/frontend.cpp:1857 tuneLoopInt [SEC] set dynamic current limiting
15:17:01.315 [ ] dvb/pmt.cpp:187 PATready PATready
15:17:01.315 [ ] dvb/pmt.cpp:198 PATready PAT TSID: 0x03f9 (1017)
15:17:01.315 [ ] dvb/pmt.cpp:227 PATready use pmtpid 0061 for service_id ef75
15:17:01.650 [ ] service/servicedvb.cpp:1218 serviceEvent eventNewProgramInfo 0 0
15:17:01.653 < > service/servicedvb.cpp:2787 updateDecoder have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
15:17:01.653 [ ] service/servicedvb.cpp:3474 setAC3Delay Setting audio delay: setAC3Delay, 0 + 0
15:17:01.654 [ ] service/servicedvb.cpp:3485 setPCMDelay Setting audio delay: setPCMDelay, 0 + 0
15:17:01.654 [ ] dvb/decoder.cpp:829 setState decoder state: play, vpid=511, apid=515
15:17:01.673 { } Plugins/Extensions/Volume_adjust/plugin.py:468 __evUpdatedInfo [Volume Adjust] Update Info
15:17:01.674 { } Plugins/Extensions/Volume_adjust/plugin.py:472 __evUpdatedInfo [Volume Adjust] Volume = 50
15:17:01.674 { } Plugins/Extensions/Volume_adjust/plugin.py:446 loadXML [Volume Adjust] load xml...
15:17:01.685 [ ] dvb_ci/dvbci.cpp:978 gotPMT [eDVBCIInterfaces] gotPMT
15:17:02.206 [ ] dvb/pmt.cpp:738 SDTScanEvent sdt update done!
15:17:02.498 [ ] dvb/pmt.cpp:237 AITready AITready
15:17:02.760 [ ] dvb/dvbtime.cpp:416 updateTime [eDVBLocalTimerHandler] Transponder time is 08.01.2017 15:17:00
15:17:02.760 [ ] dvb/dvbtime.cpp:429 updateTime [eDVBLocalTimerHandler] diff is -2
15:17:02.760 [ ] dvb/dvbtime.cpp:432 updateTime [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
15:17:02.760 [ ] dvb/dvbtime.cpp:49 setRTC [eDVBLocalTimerHandler] set RTC Time
15:17:02.761 [ ] dvb/dvbtime.cpp:502 updateTime [eDVBLocalTimerHandler] update RTC
15:17:02.761 [ ] dvb/dvbtime.cpp:522 updateTime [eDVBLocalTimerHandler] time update to 15:17:00
15:17:02.761 [ ] dvb/dvbtime.cpp:525 updateTime [eDVBLocalTimerHandler] m_time_difference is -2
15:17:02.761 [ ] dvb/dvbtime.cpp:529 updateTime [eDVBLocalTimerHandler] set Linux Time
15:17:00.761 [ ] dvb/dvbtime.cpp:540 updateTime [eDVBLocalTimerHandler] time after update is 15:17:00
15:17:02.804 { } Components/Console.py:40 eBatchCB [eBatch] retval=0, cmds left=1, data:
15:17:02.805 { } Components/Console.py:40 eBatchCB
15:17:02.806 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
15:17:02.843 { } Components/Console.py:40 eBatchCB [eBatch] retval=0, cmds left=0, data:
15:17:02.844 { } Components/Console.py:40 eBatchCB
15:17:02.846 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 66(16)
15:17:03.075 [ ] dvb/epgcache.cpp:1558 startEPG [EPGC] start caching events
15:17:03.390 < > dvb/decoder.cpp:540 video_event VIDEO_GET_EVENT - ok
15:17:03.391 < > dvb/decoder.cpp:540 video_event VIDEO_GET_EVENT - ok
15:17:03.413 < > dvb/decoder.cpp:540 video_event VIDEO_GET_EVENT - ok
15:17:03.416 { } Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: Setting EPG language: de_DE
15:17:03.418 [ ] dvb/pmt.cpp:323 OCready OCready
15:17:03.902 { } Plugins/Extensions/EnhancedMovieCenter/VlcPluginInterface.py:54 <module> [VLC] Checking for buildin servicets ... no
15:17:03.903 { E } Plugins/Extensions/EnhancedMovieCenter/VlcPluginInterface.py:59 <module> [VLC] Checking for existing and usable servicets.so ... No module named servicets
15:17:03.904 { } Plugins/Extensions/EnhancedMovieCenter/VlcPluginInterface.py:62 <module> [VLC] Checking for usable gstreamer service ... yes
15:17:04.058 { E } Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py:90 <module> [EMCMS] python-mutagen is not available: No module named mutagen.mp3
15:17:04.063 { } Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: Next trashcan cleanup in 583 minutes
15:17:06.065 { } Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: [EMCMS] trashcan cleanup: no trashcan...
15:17:10.080 [ ] dvb/epgcache.cpp:1748 abortNonAvail [EPGC] abort non avail schedule other reading
15:17:10.080 [ ] dvb/epgcache.cpp:1772 abortNonAvail [EPGC] abort non avail netmed schedule reading
15:17:10.081 [ ] dvb/epgcache.cpp:1779 abortNonAvail [EPGC] abort non avail netmed schedule other reading
15:17:10.081 [ ] dvb/epgcache.cpp:1788 abortNonAvail [EPGC] abort non avail FreeSat schedule_other reading
15:17:10.082 [ ] dvb/epgcache.cpp:1799 abortNonAvail [EPGC] abort non avail viasat reading
15:17:10.206 < > dvb/epgcache.cpp:2046 readData [EPGC] nownext
15:17:10.206 [ ] dvb/epgcache.cpp:2087 readData finished(1483885030)
15:17:20.103 < > dvb/epgcache.cpp:2046 readData [EPGC] schedule
15:17:20.103 [ ] dvb/epgcache.cpp:2087 readData finished(1483885040)
15:17:20.103 [ ] dvb/epgcache.cpp:1537 finishEPG [EPGC] stop caching events
15:17:20.104 [ ] dvb/epgcache.cpp:1539 finishEPG [EPGC] next update in 60 min
15:17:40.553 [ ] driver/rcinput.cpp:38 handleCode 1 16d 1
15:17:40.555 { } Screens/InfoBarGenerics.py:207 actionA KEY: 365 0 KEY_EPG
15:17:40.731 [ ] driver/rcinput.cpp:38 handleCode 0 16d 1
15:17:40.733 { } Screens/InfoBarGenerics.py:207 actionA KEY: 365 1 KEY_EPG
15:17:40.750 { } Components/ActionMap.py:46 action action -> InfobarEPGActions EPGPressed
15:17:40.834 { } skin.py:1039 readSkin [SKIN] processing screen GraphicalEPG:
15:17:40.902 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element number in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.903 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element jump in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.908 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element primetime in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.909 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element timeline2 in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.910 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element timeline3 in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.911 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element timeline0 in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.912 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element timeline1 in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.913 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element timeline4 in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.913 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element timeline5 in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.917 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element change_bouquet in <class 'Screens.EpgSelection.EPGSelection'>
15:17:40.927 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element page in <class 'Screens.EpgSelection.EPGSelection'>
15:17:41.464 { D } Traceback (most recent call last):
15:17:41.464 { D } File "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action
15:17:41.464 { D } File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2036, in showDefaultEPG
15:17:41.465 { D } File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1803, in EPGPressed
15:17:41.465 { D } File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1909, in openGraphEPG
15:17:41.466 { D } File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1889, in MultiServiceEPG
15:17:41.466 { D } File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1860, in openBouquetEPG
15:17:41.467 { D } File "/usr/lib/enigma2/python/mytest.py", line 311, in openWithCallback
15:17:41.467 { D } dlg = self.open(screen, *arguments, **kwargs)
15:17:41.468 { D } File "/usr/lib/enigma2/python/mytest.py", line 321, in open
15:17:41.468 { D } dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
15:17:41.469 { D } File "/usr/lib/enigma2/python/mytest.py", line 259, in instantiateDialog
15:17:41.469 { D } return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
15:17:41.470 { D } File "/usr/lib/enigma2/python/mytest.py", line 288, in doInstantiateDialog
15:17:41.470 { D } dlg.applySkin()
15:17:41.471 { D } File "/usr/lib/enigma2/python/Components/GUISkin.py", line 114, in applySkin
15:17:41.471 { D } File "/usr/lib/enigma2/python/Components/GUISkin.py", line 47, in createGUIScreen
15:17:41.472 { D } File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 466, in onCreate
15:17:41.472 { D } File "/usr/lib/enigma2/python/Components/EpgList.py", line 1387, in fillGraphEPG
15:17:41.472 { D } TypeError: 'ServiceReference' object has no attribute '__getitem__'
15:17:41.473 [ E ] python/python.cpp:209 call (PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x71afd328>>,('InfobarEPGActions', 'EPGPressed')) failed)
]=]=>
</enigma2crashlog>
</crashlogs>
</openATV>

Kann einer von Euch damit etwas anfangen?
Ich würde ja vermuten, dass es etwas mit der Änderung der Datei zu tun hat, die mir CC9 vorgeschlagen hat...

Zitat von marcmd

... dass es etwas mit der Änderung der Datei zu tun hat ...

Keine Ahnung, welche Datei du meinst- aber Änderungen bei Oscam haben
i.d.R. nichts mit den restlichen Receiver-Funktionen zu tun.
Zum Thema PN- ist dir mal der rote Text in meiner Signatur aufgefallen?

Zitat von marcmd

ich meine die OE2.0 // Oscam-Emu # svn 11289.

Dann pack dir doch wieder die openpli40 drauf und teste, ob damit
alles funktioniert und es Abstürze gibt.

Ich habe Dir ja lediglich eine PN geschrieben, um Dich zu fragen ...

Und ich wollte dir lediglich mitteilen, was mit deinen PN passiert ist ...

@Link nur für registrierte und freigeschaltete Mitglieder sichtbar.

Zitat von marcmd

Ich habe Dir ja lediglich eine PN geschrieben, um Dich zu fragen, ob Du nochmal in einem bestehen Thread etwas gucken kannst

Dafür gibt es doch den Mention-Code --> so wie ich es jetzt mit Dir gemacht habe


... Pumuckel