Thema: Fehlermeldung bei HD+ 02 Karte

• 2018/08/19 13:32:32 00000000 s (main) System name = Linux
• 2018/08/19 13:32:32 00000000 s (main) Host name = ax51
• 2018/08/19 13:32:32 00000000 s (main) Release = 4.10.12
• 2018/08/19 13:32:32 00000000 s (main) Version = #1 SMP Wed Aug 1 14:48:06 CEST 2018
• 2018/08/19 13:32:32 00000000 s (main) Machine = armv7l
• 2018/08/19 13:32:32 00000000 s (main) Stb model = hd51
• 2018/08/19 13:32:32 00000000 s (main) Stb boxtype = hd51
• 2018/08/19 13:32:32 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7375
• 2018/08/19 13:32:32 00000000 s (emu) OSCam-Emu version 765
• 2018/08/19 13:32:32 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/19 13:32:32 00000000 s (main) signal handling initialized
• 2018/08/19 13:32:32 00000000 s (net) cccam: initialized (fd=4, port=12000)
• 2018/08/19 13:32:32 00000000 s (reader) reader0_hd+_hd02 [internal] creating thread for device /dev/sci0
• 2018/08/19 13:32:32 00000000 s (reader) reader1_hd+_hd02 [internal] creating thread for device /dev/sci1
• 2018/08/19 13:32:32 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2018/08/19 13:32:32 00000000 s (main) waiting for local card init
• 2018/08/19 13:32:32 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:32 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:32 7496D60F r (emu) Stream key delayer initialized
• 2018/08/19 13:32:32 7496D60F r (emu) Stream relay server initialized
• 2018/08/19 13:32:32 7496D60F r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2018/08/19 13:32:32 00000000 (emu) INFO: FFDecsa parallel mode = 32
• 2018/08/19 13:32:32 55515175 r (reader) reader0_hd+_hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
• 2018/08/19 13:32:32 55515175 r (reader) reader0_hd+_hd02 [internal] Reader sci internal, detected box type: hd51
• 2018/08/19 13:32:32 325817DF h (webif) webif: decompressed 197748 bytes back into 472864 bytes
• 2018/08/19 13:32:32 325817DF h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/19 13:32:33 55515175 r (reader) reader0_hd+_hd02 [internal] card detected
• 2018/08/19 13:32:33 7496D60F r (reader) emulator [emu] card detected
• 2018/08/19 13:32:34 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:34 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/08/19 13:32:34 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/08/19 13:32:34 7496D60F r (reader) emulator [emu] found card system emu
• 2018/08/19 13:32:34 7496D60F r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/08/19 13:32:34 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:34 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:34 7496D60F r (emu) Key file not found in: /usr/keys/oscam_atv
• 2018/08/19 13:32:34 7496D60F r (emu) Key file not found in: /var/keys
• 2018/08/19 13:32:34 7496D60F r (emu) Total keys in memory: W:0 V:6 N:0 I:0 S:0 F:0 P:0 D:0 T:0
• 2018/08/19 13:32:36 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:36 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:37 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 3006539
• 2018/08/19 13:32:37 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/08/19 13:32:37 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
• 2018/08/19 13:32:37 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:38 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:38 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:38 55515175 r (reader) reader0_hd+_hd02 [internal] detect native nagra card
• 2018/08/19 13:32:40 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:40 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:42 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:42 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:42 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2018/08/19 13:32:44 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:44 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:46 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:46 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:46 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
• 2018/08/19 13:32:47 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:47 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/08/19 13:32:47 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/08/19 13:32:47 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75101
• 2018/08/19 13:32:48 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/08/19 13:32:48 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
• 2018/08/19 13:32:48 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:48 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:48 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:50 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:50 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:52 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2018/08/19 13:32:52 2065D165 r (reader) reader1_hd+_hd02 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
• 2018/08/19 13:32:52 2065D165 r (reader) reader1_hd+_hd02 [internal] Cannot open device: /dev/sci1
• 2018/08/19 13:32:52 2065D165 r (reader) reader1_hd+_hd02 [internal] Deactivating card
• 2018/08/19 13:32:52 2065D165 r (reader) reader1_hd+_hd02 [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)
• 2018/08/19 13:32:56 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
• 2018/08/19 13:32:56 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:56 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/08/19 13:32:56 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/08/19 13:32:56 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75111
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] card system not supported
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] Normal mode failed, reverting to Deprecated Mode
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/08/19 13:32:57 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2018/08/19 13:33:01 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 3051709
• 2018/08/19 13:33:01 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/08/19 13:33:07 55515175 r (reader) reader0_hd+_hd02 [internal] Warning: Card returned error on setting ifsd value to 251
• 2018/08/19 13:33:07 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:33:08 55515175 r (reader) reader0_hd+_hd02 [internal] detect native nagra card
• 2018/08/19 13:33:14 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2018/08/19 13:33:17 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
• 2018/08/19 13:33:18 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:33:18 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/08/19 13:33:18 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/08/19 13:33:18 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75116
• 2018/08/19 13:33:19 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/08/19 13:33:19 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
• 2018/08/19 13:33:19 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:33:23 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2018/08/19 13:33:27 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
• 2018/08/19 13:33:27 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:33:27 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/08/19 13:33:27 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/08/19 13:33:27 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75099
• 2018/08/19 13:33:28 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/08/19 13:33:28 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
• 2018/08/19 13:33:28 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
• 2018/08/19 13:33:28 55515175 r (reader) reader0_hd+_hd02 [internal] card system not supported
• 2018/08/19 13:33:28 55515175 r (reader) reader0_hd+_hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2018/08/19 13:33:28 55515175 r (reader) reader0_hd+_hd02 [internal] card initializing error
• 2018/08/19 13:33:29 00000000 s (main) init for all local cards done
• 2018/08/19 13:33:29 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2018/08/19 13:33:29 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2018/08/19 13:33:29 00000000 s (anticasc) anti cascading disabled
• 2018/08/19 13:33:29 0489E80B c (client) plain dvbapi-client granted (dvbapiau, au=auto (5 reader))
• 2018/08/19 13:33:29 0489E80B c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
• 2018/08/19 13:33:29 0489E80B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

Was mache ich falsch ?

Wer soll da was erkennen?

Was ich mit größter Mühe sehen kann
Du hast eine AX 51 4k.

Configs im oscam.server stimmen nicht device = /dev/sci1 ist falsch.
Die Box hat nur einen Kartenleser also device = /dev/sci0

ist richtig

2018/08/19 14:04:26 00000000 s (main) System name = Linux2018/08/19 14:04:26 00000000 s (main) Host name = ax51
2018/08/19 14:04:26 00000000 s (main) Release = 4.10.12
2018/08/19 14:04:26 00000000 s (main) Version = #1 SMP Wed Aug 1 14:48:06 CEST 2018
2018/08/19 14:04:26 00000000 s (main) Machine = armv7l
2018/08/19 14:04:26 00000000 s (main) Stb model = hd51
2018/08/19 14:04:26 00000000 s (main) Stb boxtype = hd51
2018/08/19 14:04:26 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14075
2018/08/19 14:04:26 00000000 s (emu) OSCam-Emu version 765
2018/08/19 14:04:26 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/08/19 14:04:26 00000000 s (main) signal handling initialized
2018/08/19 14:04:26 00000000 s (net) cccam: initialized (fd=4, port=12000)
2018/08/19 14:04:26 00000000 s (reader) reader0_hd+_hd02 [internal] creating thread for device /dev/sci0
2018/08/19 14:04:26 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/08/19 14:04:26 00000000 s (main) waiting for local card init
2018/08/19 14:04:26 2065D165 r (emu) Stream key delayer initialized
2018/08/19 14:04:26 2065D165 r (emu) Stream relay server initialized
2018/08/19 14:04:26 2065D165 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/08/19 14:04:26 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/08/19 14:04:26 55515175 r (reader) reader0_hd+_hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2018/08/19 14:04:26 55515175 r (reader) reader0_hd+_hd02 [internal] Reader sci internal, detected box type: hd51
2018/08/19 14:04:26 325817DF h (webif) webif: decompressed 197748 bytes back into 472864 bytes
2018/08/19 14:04:26 325817DF h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/08/19 14:04:27 55515175 r (reader) reader0_hd+_hd02 [internal] card detected
2018/08/19 14:04:27 2065D165 r (reader) emulator [emu] card detected
2018/08/19 14:04:27 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:27 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/19 14:04:27 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2018/08/19 14:04:28 2065D165 r (reader) emulator [emu] found card system emu
2018/08/19 14:04:28 2065D165 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/08/19 14:04:28 2065D165 r (emu) Key file not found in: /usr/keys/oscam_atv
2018/08/19 14:04:28 2065D165 r (emu) Key file not found in: /var/keys
2018/08/19 14:04:28 2065D165 r (emu) Total keys in memory: W:0 V:6 N:0 I:0 S:0 F:0 P:0 D:0 T:0
2018/08/19 14:04:30 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 3016748
2018/08/19 14:04:31 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/08/19 14:04:31 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/19 14:04:31 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:32 55515175 r (reader) reader0_hd+_hd02 [internal] detect native nagra card
2018/08/19 14:04:36 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/19 14:04:40 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75107
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/19 14:04:41 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:45 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/19 14:04:50 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] ERROR: no characters found in ATR!
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] Deactivating card
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] Read ATR fail, attempt 1/5 fs = 3
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2018/08/19 14:04:51 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75107
2018/08/19 14:04:52 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/08/19 14:04:52 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/19 14:04:52 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:52 55515175 r (reader) reader0_hd+_hd02 [internal] card system not supported
2018/08/19 14:04:52 55515175 r (reader) reader0_hd+_hd02 [internal] Normal mode failed, reverting to Deprecated Mode
2018/08/19 14:04:53 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:04:53 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/19 14:04:53 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2018/08/19 14:04:56 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 3007778
2018/08/19 14:04:56 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/08/19 14:05:02 55515175 r (reader) reader0_hd+_hd02 [internal] Warning: Card returned error on setting ifsd value to 251
2018/08/19 14:05:02 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:05:03 55515175 r (reader) reader0_hd+_hd02 [internal] detect native nagra card
2018/08/19 14:05:09 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/19 14:05:16 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/19 14:05:16 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:05:16 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/19 14:05:16 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2018/08/19 14:05:16 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75102
2018/08/19 14:05:17 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/08/19 14:05:17 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/19 14:05:17 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:05:21 55515175 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/19 14:05:25 55515175 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/19 14:05:25 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:05:25 55515175 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/19 14:05:25 55515175 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75108
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] card system not supported
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/08/19 14:05:26 55515175 r (reader) reader0_hd+_hd02 [internal] card initializing error
2018/08/19 14:05:27 00000000 s (main) init for all local cards done
2018/08/19 14:05:27 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/08/19 14:05:27 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/08/19 14:05:27 00000000 s (anticasc) anti cascading disabled
2018/08/19 14:05:27 4E34CE58 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2018/08/19 14:05:27 4E34CE58 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2018/08/19 14:05:27 4E34CE58 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

Dann noch ein lesbarer Versuch.

- - - - - - - - - -

Welche Oscam-Version brauche ich ?

Welches Image ist auf der Box? Wie hast du Oscam installiert?

OpenAtv 6.1 / per IPG- Datei

- - - - - - - - - -

enigma2-softcams-oscam-all-images_11.431-r0+arm-mips_all.ipk

- - - - - - - - - -

OpenAtv 6.1 / per IPK- Datei

- - - - - - - - - -

enigma2-softcams-oscam-all-images_11.431-r0+arm-mips_all.ipk

Mein Tipp
Ein aktuelles Openatv 6.2 flashen und anschließend das Openatv Softcamfeed installieren, danach kannst du oscam online herunterladen
Link nur für registrierte und freigeschaltete Mitglieder sichtbar.


Oscam online herunterladen
Grüne Taste drücken > Plugin Manager öffnet sich > noch mal grüne Taste drücken>
Herunterladbare Plugins öffnet sich > zu softcam gehen > oscam atv emu 11397 herunterladen
Oscam starten
Blaue Taste drücken > zu Softcam gehen > zu Softcam Panel gehen >
Bei „ Wähle Cam1“ die installierte oscam atv emu 11397 auswählen und mit grünerTaste starten
Unter usr/keys wird ein Ordner namens oscam atv erstellt, in diesen befinden sich die Oscam Config Dateien

Oder diese oscam 11431 ipk nehmen
Link nur für registrierte und freigeschaltete Mitglieder sichtbar.

Habe #10 Tipp befolgt und leider werden die HD+ Programme noch immer nicht hell.

Openatv 6.2
oscam atv emu 11397

@2018/08/20 08:52:19 00000000 s (main) System name = Linux2018/08/20 08:52:19 00000000 s (main) Host name = ax51
2018/08/20 08:52:19 00000000 s (main) Release = 4.10.12
2018/08/20 08:52:19 00000000 s (main) Version = #1 SMP Sun Jul 29 04:45:59 CEST 2018
2018/08/20 08:52:19 00000000 s (main) Machine = armv7l
2018/08/20 08:52:19 00000000 s (main) Stb model = hd51
2018/08/20 08:52:19 00000000 s (main) Stb boxtype = hd51
2018/08/20 08:52:19 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7362
2018/08/20 08:52:19 00000000 s (emu) OSCam-Emu version 765
2018/08/20 08:52:19 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/08/20 08:52:19 00000000 s (main) signal handling initialized
2018/08/20 08:52:19 00000000 s (config) 3 provid's loaded
2018/08/20 08:52:19 00000000 s (config) 6 service-id's loaded in 0 ms
2018/08/20 08:52:19 00000000 s (net) cccam: initialized (fd=4, port=12000)
2018/08/20 08:52:19 00000000 s (reader) reader0_hd+_hd02 [internal] creating thread for device /dev/sci0
2018/08/20 08:52:19 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/08/20 08:52:19 00000000 s (main) waiting for local card init
2018/08/20 08:52:19 64029689 r (reader) reader0_hd+_hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz)
2018/08/20 08:52:19 64029689 r (reader) reader0_hd+_hd02 [internal] Reader sci internal, detected box type: hd51
2018/08/20 08:52:19 7C354E13 r (emu) Stream key delayer initialized
2018/08/20 08:52:19 7C354E13 r (emu) Stream relay server initialized
2018/08/20 08:52:19 7C354E13 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/08/20 08:52:19 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/08/20 08:52:19 4CA1458E h (webif) webif: decompressed 197748 bytes back into 472864 bytes
2018/08/20 08:52:19 4CA1458E h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/08/20 08:52:20 7C354E13 r (reader) emulator [emu] card detected
2018/08/20 08:52:20 64029689 r (reader) reader0_hd+_hd02 [internal] card detected
2018/08/20 08:52:21 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:21 64029689 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/20 08:52:21 64029689 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2018/08/20 08:52:21 7C354E13 r (reader) emulator [emu] found card system emu
2018/08/20 08:52:21 7C354E13 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/08/20 08:52:21 7C354E13 r (emu) Key file not found in: /usr/keys/oscam_atv
2018/08/20 08:52:21 7C354E13 r (emu) Key file not found in: /var/keys
2018/08/20 08:52:21 7C354E13 r (emu) Total keys in memory: W:0 V:6 N:0 I:0 S:0 F:0 P:0 D:0 T:0
2018/08/20 08:52:24 64029689 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 3052719
2018/08/20 08:52:24 64029689 r (reader) reader0_hd+_hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2018/08/20 08:52:24 64029689 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/20 08:52:24 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:25 64029689 r (reader) reader0_hd+_hd02 [internal] detect native nagra card
2018/08/20 08:52:29 64029689 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/20 08:52:33 64029689 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/20 08:52:34 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:34 64029689 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/20 08:52:34 64029689 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2018/08/20 08:52:34 64029689 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75104
2018/08/20 08:52:35 64029689 r (reader) reader0_hd+_hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2018/08/20 08:52:35 64029689 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/20 08:52:35 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:39 64029689 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/20 08:52:43 64029689 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/20 08:52:43 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:43 64029689 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/20 08:52:43 64029689 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2018/08/20 08:52:43 64029689 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75103
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] card system not supported
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] Normal mode failed, reverting to Deprecated Mode
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/20 08:52:44 64029689 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2018/08/20 08:52:47 64029689 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 3051566
2018/08/20 08:52:48 64029689 r (reader) reader0_hd+_hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/08/20 08:52:54 64029689 r (reader) reader0_hd+_hd02 [internal] Warning: Card returned error on setting ifsd value to 251
2018/08/20 08:52:54 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:52:55 64029689 r (reader) reader0_hd+_hd02 [internal] detect native nagra card
2018/08/20 08:53:02 64029689 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/20 08:53:08 64029689 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75105
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/20 08:53:09 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:53:14 64029689 r (reader) reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/20 08:53:18 64029689 r (reader) reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2018/08/20 08:53:18 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:53:18 64029689 r (reader) reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/20 08:53:18 64029689 r (reader) reader0_hd+_hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2018/08/20 08:53:18 64029689 r (reader) reader0_hd+_hd02 [internal] Buffers readed 0 bytes total time_us 75106
2018/08/20 08:53:19 64029689 r (reader) reader0_hd+_hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2018/08/20 08:53:19 64029689 r (reader) reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 251
2018/08/20 08:53:19 64029689 r (reader) reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2018/08/20 08:53:19 64029689 r (reader) reader0_hd+_hd02 [internal] card system not supported
2018/08/20 08:53:19 64029689 r (reader) reader0_hd+_hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/08/20 08:53:19 64029689 r (reader) reader0_hd+_hd02 [internal] card initializing error
2018/08/20 08:53:20 00000000 s (main) init for all local cards done
2018/08/20 08:53:20 00000000 s (anticasc) anti cascading disabled
2018/08/20 08:53:20 3085068B c (client) plain dvbapi-client granted (dvbapiau, au=auto (21 reader))
2018/08/20 08:53:20 3085068B c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2018/08/20 08:53:20 3085068B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)


[COLOR=#333333][FONT=Verdana][/FONT][/COLOR];

[global]

[cccam]
port = 12000
reshare = 0
version = 2.3.0


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau


[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 0500:023800 # SRG 2.6
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 0D05 # ORF CW / EMU
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 0D95 # ORF ICE
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 1830:003411 # HD01
P: 1843:003411 # HD02
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 1702 # S02
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 1833 # S02HD ohne Betatunnel
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 094C # V13
Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : 098C # V14

# oscam.server generated automatically by Streamboard OSCAM 1.20-EMU-NFR SVN r8986
# Read more: Link nur für registrierte und freigeschaltete Mitglieder sichtbar.


[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 11*************8
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2


[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_sky_v14
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A**************C
rsakey = BF3**************************************************************************************************************************DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2


[reader]
label = reader0_hd+_hd02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A76****
rsakey = BF358****DD5
detect = cd
mhz = 500
cardmhz = 2700
group = 1
emmcache = 1,3,2


[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_smarthd
enable = 0
protocol = internal
device = /dev/sci0
caid = 0B01
detect = cd
mhz = 500
cardmhz = 357
ident = 0B01:000000
group = 1
emmcache = 1,3,-1


[reader]
label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 11*************8
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2


[reader]
label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_sky_v14
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A**************C
rsakey = BF3**************************************************************************************************************************DD5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2


[reader]
label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = A**************C
rsakey = BF3**************************************************************************************************************************DD5
detect = cd
mhz = 500
cardmhz = 2700
group = 2
emmcache = 1,3,2


[reader]
label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_smarthd
enable = 0
protocol = internal
device = /dev/sci1
caid = 0B01
detect = cd
mhz = 500
cardmhz = 357
ident = 0B01:000000
group = 2
emmcache = 1,3,-1




[reader]
label = line_cccam
enable = 0
protocol = cccam
device = 192.168.0.11,12000
user = user
password = pass
inactivitytimeout = 30
fallback = 1
group = 3
cccversion = 2.3.0
ccckeepalive = 1


[reader]
label = line_newcamd
enable = 0
protocol = newcamd
device = 192.168.0.11,35000
key = 0102030405060708091011121314
user = user
password = password
fallback = 1
group = 4







0100@000068,1813@000068,1884,0B01,0500@032A00:1134||TRACE TV|TV
186C,1861,1803,0100@000068,0B01,0500@032A00,1813@000068,1884,06ED:3334||Polsat Film|TV
1830,1843,1860,098C,09C4,0500@051900,06CB,186A,186D,098D:EF10||RTL HD|TV
1830,1843,09C4,098C,1860,186A,098D,186D,0500@051900,06CB:EF74||SAT.1 HD|TV
1830,1860,1843,098C,09C4,186A,098D,186D,0500@051900,06CB:30D4||SAT.1 Gold HD|TV
1830,1843,09C4,098C,1860,186A,098D,186D,0500@051900,06CB:EF75||ProSieben HD|TV



[account]
user = dvbapiau
pwd =
group = 1,2,3,4,5
uniq = 3
au = 1

Hat jemand noch eine Idee, was zu tun ist ?

Danke

oscam.conf

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 256
suppresscmd08 = 1


[cs378x]
port = 15000


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox


[webif]
httpport = 83
httpuser = admin
httpowd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255

oscam.server

[reader]
label = reader0_hd+_hd02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A**************C
rsakey = BF3**************************************************************************************************************************DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

oscam.user

[account]
user = local
au = 1
group = 1