Thema: Automatische Auflösung geht nicht

Hallo! jeder. Ich bin abgestürzt, als ich die automatische Auflösung auf maxytec aktiviere

HTML-Code:

openNFR Enigma2 crash log
crashdate=dim. mai 16 18:23:26 2021compiledate=May 13 2021skin=NFR_Skin/skin.xmlsourcedate=2021-05-10branch=6.5rev=666bfbbcomponent=Enigma2
stbmodel=multiboxstbmodel=multiboxkernelcmdline=root=/dev/mmcblk0p23 rootsubdir=linuxrootfs3 rootfstype=ext4 kernel=/dev/mmcblk0p21 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(e2tv),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,60M vmalloc=500Mnimsockets=NIM Socket 0:imageversion=box_type=maxytecmultiimageissue=opennfr 6.5 %h

18:22:55.4210 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=282118:22:55.4219 [   ] dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:1F:7DA:449:1:C00000:0:0:0:18:22:55.4219 [   ] dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:1F:7DA:449:1:C00000:0:0:0:18:22:55.4220 [   ] dvb_ci/dvbci.cpp:1030 gotPMT [eDVBCIInterfaces] gotPMT18:22:55.4221 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux018:22:55.4222 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=10618:22:55.6873 [   ] dvb/frontend.cpp:2482 tuneLoopInt [SEC] set dynamic current limiting18:22:55.9673 [   ] dvb/pmt.cpp:1006 SDTScanEvent [eDVBServicePMTHandler] sdt update done!18:22:56.2051 [   ] dvb/pmt.cpp:301 AITready [eDVBServicePMTHandler] AITready18:22:56.2052 [   ] dvb/pmt.cpp:320 AITready [eDVBServicePMTHandler] Section Length : 109, Total Section Length : 11218:22:56.2052 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 33, appid : 1418:22:56.2053 [   ] dvb/pmt.cpp:295 saveData [eDVBServicePMTHandler] Save Data Len : [112]18:22:56.2056 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[1], name[QVC Plus], url[http://hbbtv.qvc.de/v2/hbbtv_qvc2_redbutton/index.php]18:22:56.2067 {   } Screens/InfoBarGenerics.py:3240 detectedHbbtvApplication [InfoBarGenerics] HbbtvApplication: (1, 'QVC Plus', 'http://hbbtv.qvc.de/v2/hbbtv_qvc2_redbutton/index.php', 33, 14, 0)18:22:56.3276 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux018:22:56.3277 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1818:22:56.4201 [   ] service/servicedvb.cpp:1743 timeshift [eDVBServicePlay] timeshift18:22:56.4203 [   ] service/servicedvb.cpp:1766 timeshift [eDVBServicePlay] not enough diskspace for timeshift! (less than 1GB)18:22:56.4716 <   > dvb/decoder.cpp:547 video_event [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 3840x2160 aspect 3
18:22:56.4720 <   > dvb/decoder.cpp:547 video_event [eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 1
18:22:56.5106 <   > dvb/decoder.cpp:547 video_event [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 3840x2160 aspect 3
18:22:56.5109 <   > dvb/decoder.cpp:547 video_event [eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 50000 fps
18:22:56.5110 <   > dvb/decoder.cpp:547 video_event [eDVBVideo0] VIDEO_GET_EVENT GAMMA_CHANGED 0
18:22:57.2655 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=384218:22:57.2660 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=300318:22:57.2661 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1818:22:57.2664 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1818:22:57.2666 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1818:22:57.2668 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=500018:22:57.2669 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=500018:22:57.2670 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5718:23:03.4796 [   ] dvb/dvbtime.cpp:471 updateTime [eDVBLocalTimerHandler] Transponder time is 16.05.2021 18:23:0218:23:03.4796 [   ] dvb/dvbtime.cpp:490 updateTime [eDVBLocalTimerHandler] diff is -118:23:03.4797 [   ] dvb/dvbtime.cpp:493 updateTime [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time18:23:03.4797 [   ] dvb/dvbtime.cpp:49 setRTC [eDVBLocalTimerHandler] set RTC Time18:23:03.4798 [   ] dvb/dvbtime.cpp:563 updateTime [eDVBLocalTimerHandler] update RTC18:23:03.4799 [   ] dvb/dvbtime.cpp:580 updateTime [eDVBLocalTimerHandler] time update to 18:23:0218:23:03.4799 [   ] dvb/dvbtime.cpp:586 updateTime [eDVBLocalTimerHandler] m_time_difference is -118:23:03.4799 [   ] dvb/dvbtime.cpp:597 updateTime [eDVBLocalTimerHandler] slewing Linux Time by -01 seconds18:23:03.4802 [   ] dvb/dvb.cpp:2421 getDemux [eDVBChannel] getDemux cap=0018:23:04.2672 [   ] dvb/epgcache.cpp:2307 abortNonAvail [EPGCache] abort non avail schedule other reading18:23:04.2676 [   ] dvb/epgcache.cpp:2331 abortNonAvail [EPGCache] abort non avail netmed schedule reading18:23:04.2678 [   ] dvb/epgcache.cpp:2338 abortNonAvail [EPGCache] abort non avail netmed schedule other reading18:23:04.2680 [   ] dvb/epgcache.cpp:2347 abortNonAvail [EPGCache] abort non avail FreeSat schedule_other reading18:23:04.2682 [   ] dvb/epgcache.cpp:2358 abortNonAvail [EPGCache] abort non avail viasat reading18:23:05.6545 <   > dvb/epgcache.cpp:2637 readData [EPGCache] nownext finished(1621185785)
18:23:05.6666 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 8b 118:23:05.6683 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 139 0 KEY_MENU MENU18:23:05.8386 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 8b 118:23:05.8407 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 139 1 KEY_MENU MENU18:23:05.8484 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.18:23:05.8792 {   } skin.py:1042 readSkin [SKIN] No skin to read...18:23:05.8797 {   } Screens/Screen.py:125 show [Screen] Showing screen 'MenuSummary'.18:23:05.8808 {   } Screens/Screen.py:125 show [Screen] Showing screen '['menu_mainmenu', 'Menu']'.18:23:07.4436 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:07.4449 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:07.4451 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'WizardActions' -> Action = 'down'.18:23:07.6155 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:07.6170 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:08.0921 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 118:23:08.0937 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 0 KEY_OK OK18:23:08.0939 { W } Components/ActionMap.py:56 action [ActionMap] Keymap 'WizardActions' -> Unknown action 'ok'! (Typo in keymap?)18:23:08.0940 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.18:23:08.1202 {   } skin.py:1042 readSkin [SKIN] No skin to read...18:23:08.1208 {   } Screens/Screen.py:125 show [Screen] Showing screen 'MenuSummary'.18:23:08.1212 {   } Screens/Screen.py:125 show [Screen] Showing screen '['menu_setup', 'Menu']'.18:23:08.2640 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 118:23:08.2655 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 1 KEY_OK OK18:23:08.9865 <   > dvb/epgcache.cpp:2637 readData [EPGCache] schedule finished(1621185788)
18:23:08.9869 [   ] dvb/epgcache.cpp:1651 finishEPG [EPGCache] next update in 60 min18:23:09.2465 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 118:23:09.2479 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 0 KEY_OK OK18:23:09.2480 { W } Components/ActionMap.py:56 action [ActionMap] Keymap 'WizardActions' -> Unknown action 'ok'! (Typo in keymap?)18:23:09.2481 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.18:23:09.2907 {   } skin.py:1042 readSkin [SKIN] No skin to read...18:23:09.2912 {   } Screens/Screen.py:125 show [Screen] Showing screen 'MenuSummary'.18:23:09.2917 {   } Screens/Screen.py:125 show [Screen] Showing screen '['menu_tv', 'Menu']'.18:23:09.4185 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 118:23:09.4200 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 1 KEY_OK OK18:23:10.8253 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 118:23:10.8269 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 174 0 KEY_EXIT EXIT18:23:10.8271 { W } Components/ActionMap.py:56 action [ActionMap] Keymap 'WizardActions' -> Unknown action 'back'! (Typo in keymap?)18:23:10.8272 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.18:23:10.8283 {   } Screens/Screen.py:125 show [Screen] Showing screen 'MenuSummary'.18:23:10.8298 {   } Screens/Screen.py:125 show [Screen] Showing screen '['menu_setup', 'Menu']'.18:23:10.9973 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 ae 118:23:10.9989 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 174 1 KEY_EXIT EXIT18:23:11.5959 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:11.5980 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:11.5982 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'WizardActions' -> Action = 'down'.18:23:11.7678 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:11.7696 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:12.2134 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 118:23:12.2151 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 0 KEY_OK OK18:23:12.2153 { W } Components/ActionMap.py:56 action [ActionMap] Keymap 'WizardActions' -> Unknown action 'ok'! (Typo in keymap?)18:23:12.2153 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.18:23:12.2743 {   } skin.py:1042 readSkin [SKIN] No skin to read...18:23:12.2751 {   } Screens/Screen.py:125 show [Screen] Showing screen 'MenuSummary'.18:23:12.2756 {   } Screens/Screen.py:125 show [Screen] Showing screen '['menu_system', 'Menu']'.18:23:12.3853 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 118:23:12.3869 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 1 KEY_OK OK18:23:15.2180 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 118:23:15.2199 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 0 KEY_OK OK18:23:15.2201 { W } Components/ActionMap.py:56 action [ActionMap] Keymap 'WizardActions' -> Unknown action 'ok'! (Typo in keymap?)18:23:15.2202 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.18:23:15.2474 {   } skin.py:1042 readSkin [SKIN] No skin to read...18:23:15.2482 {   } Screens/Screen.py:125 show [Screen] Showing screen 'SetupSummary'.18:23:15.2490 {   } Screens/Screen.py:125 show [Screen] Showing screen '['VideoSetup', 'Setup']'.18:23:15.3899 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 118:23:15.3913 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 352 1 KEY_OK OK18:23:16.3844 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:16.3862 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:16.5564 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:16.5580 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:16.7154 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:16.7170 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:16.8873 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:16.8887 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:17.0414 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:17.0432 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:17.2134 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:17.2150 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:17.3515 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:17.3528 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:17.5236 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:17.5256 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:17.6937 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:17.6952 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:17.8657 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:17.8671 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:18.0147 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:18.0162 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:18.1866 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:18.1883 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:18.3943 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 118:23:18.3959 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 0 KEY_DOWN DOWN18:23:18.5663 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 118:23:18.5682 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 108 1 KEY_DOWN DOWN18:23:21.2828 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 118:23:21.2842 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 0 KEY_UP UP18:23:21.4547 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 118:23:21.4563 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 1 KEY_UP UP18:23:24.7764 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 118:23:24.7779 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 0 KEY_UP UP18:23:24.9483 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 118:23:24.9499 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 1 KEY_UP UP18:23:25.0701 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 118:23:25.0716 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 0 KEY_UP UP18:23:25.2422 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 118:23:25.2441 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 1 KEY_UP UP18:23:25.3643 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 118:23:25.3662 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 0 KEY_UP UP18:23:25.6424 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 118:23:25.6442 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 1 KEY_UP UP18:23:25.6446 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 118:23:25.6459 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 0 KEY_UP UP18:23:25.8144 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 118:23:25.8160 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 1 KEY_UP UP18:23:25.9259 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 118:23:25.9274 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 0 KEY_UP UP18:23:26.0979 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 118:23:26.0993 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 103 1 KEY_UP UP18:23:26.5716 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 69 118:23:26.5730 {   } Screens/InfoBarGenerics.py:227 actionA KEY: 105 0 KEY_LEFT LEFT18:23:26.5732 { W } Components/ActionMap.py:56 action [ActionMap] Keymap 'SetupActions' -> Unknown action 'left'! (Typo in keymap?)18:23:26.5733 {   } Components/ActionMap.py:50 action [ActionMap] Keymap 'SetupActions' -> Action = 'left'.18:23:26.5748 { D } Traceback (most recent call last):18:23:26.5749 { D }   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 71, in action18:23:26.5758 { D }     return ActionMap.action(self, contexts, action)18:23:26.5758 { D }   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 51, in action18:23:26.5761 { D }     res = self.actions[action]()18:23:26.5762 { D }   File "/usr/lib/enigma2/python/Screens/VideoMode.py", line 269, in keyLeft18:23:26.5773 { D }     self.createSetup()18:23:26.5774 { D }   File "/usr/lib/enigma2/python/Screens/VideoMode.py", line 125, in createSetup18:23:26.5779 { D }     if '2160p24' in iAVSwitch.readAvailableModes():18:23:26.5780 { D } TypeError: argument of type 'NoneType' is not iterable18:23:26.5781 [ E ] python/python.cpp:224 call [ePyObject] (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xb0981ac0>>,('SetupActions', 'left')) failed)18:23:26.5782 { E } Components/config.py:2030 getResolvedKey getResolvedKey config.crash.bsodpython failed !! (Typo??)18:23:26.5783 { E } Components/config.py:2030 getResolvedKey getResolvedKey config.crash.bsodhide failed !! (Typo??)18:23:26.5785 { E } Components/config.py:2030 getResolvedKey getResolvedKey config.crash.bsodmax failed !! (Typo??)

dmesg
<6>Booting Linux on physical CPU 0x0<5>Linux version 4.4.35 (oe-user@oe-host) (gcc version 10.2.0 (GCC) ) #1 SMP Wed Jan 27 03:10:59 UTC 2021<6>CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d<6>CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache<5>initmrd: found no initmrd.<6>Machine model: Hisilicon<6>cma: Reserved 60 MiB at 0x35800000<6>cma: Reserved 4 MiB at 0x3a400000<6>Memory policy: Data cache writealloc<7>-------------Fixed IO Mapping----------<7>Virt,            Phys,             Size<7>0xF9000000,    0xF8000000,    0x02000000<7>--------------------------------------<7>On node 0 totalpages: 239872<7>free_area_init_node: node 0, pgdat c0bbc140, node_mem_map dfca1000<7>  Normal zone: 1032 pages used for memmap<7>  Normal zone: 0 pages reserved<7>  Normal zone: 132096 pages, LIFO batch:31<7>  HighMem zone: 107776 pages, LIFO batch:31<6>PERCPU: Embedded 13 pages/cpu  [MENTION=8289]DFC[/MENTION]5d000 s22604 r8192 d22452 u53248<7>pcpu-alloc: s22604 r8192 d22452 u53248 alloc=13*4096<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <6>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 238840<5>Kernel command line: root=/dev/mmcblk0p23 rootsubdir=linuxrootfs3 rootfstype=ext4 kernel=/dev/mmcblk0p21 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(e2tv),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,60M vmalloc=500M<6>log_buf_len individual max cpu contribution: 4096 bytes<6>log_buf_len total cpu_extra contributions: 12288 bytes<6>log_buf_len min size: 16384 bytes<6>log_buf_len: 32768 bytes<6>early log buf free: 14180(86%)<6>PID hash table entries: 2048 (order: 1, 8192 bytes)<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<6>Memory: 862844K/959488K available (7959K kernel code, 688K rwdata, 2240K rodata, 556K init, 522K bss, 31108K reserved, 65536K cma-reserved, 355308K highmem)<5>Virtual kernel memory layout:<5>    vector  : 0xffff0000 - 0xffff1000   (   4 kB)<5>    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)<5>    vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)<5>    lowmem  : 0xc0000000 - 0xe0400000   ( 516 MB)<5>    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)<5>    modules : 0xbf000000 - 0xbfe00000   (  14 MB)<5>      .text : 0xc0008000 - 0xc07ce214   (7961 kB)<5>      .init : 0xc0a99000 - 0xc0b24000   ( 556 kB)<5>      .data : 0xc0b24000 - 0xc0bd03ac   ( 689 kB)<5>       .bss : 0xc0bd2000 - 0xc0c54910   ( 523 kB)<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1<6>Hierarchical RCU implementation.<6>	Build-time adjustment of leaf fanout to 32.<6>NR_IRQS:352<6>clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns<6>Console: colour dummy device 80x30<6>Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)<6>pid_max: default: 32768 minimum: 301<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)<6>CPU: Testing write buffer coherency: ok<6>ftrace: allocating 26411 entries in 78 pages<6>CPU0: update cpu_capacity 1024<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000<6>Setting up static identity map for 0x8280 - 0x82d8<4>CPU: hi3798mv200<7>CPU1: powerup<6>CPU1: update cpu_capacity 1024<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001<7>CPU2: powerup<6>CPU2: update cpu_capacity 1024<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002<7>CPU3: powerup<6>CPU3: update cpu_capacity 1024<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003<6>Brought up 4 CPUs<6>SMP: Total of 4 processors activated (12681.21 BogoMIPS).<6>CPU: All CPU(s) started in SVC mode.<6>CPU3: update max cpu_capacity 1024<6>devtmpfs: initialized<6>VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns<4>PCIe read alloc area phyaddr 08  size 00000000<4>PCIe write alloc area phyaddr 08  size 00000000<6>NET: Registered protocol family 16<6>DMA: preallocated 256 KiB pool for atomic coherent allocations<6>CPU2: update max cpu_capacity 1024<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.<6>hw-breakpoint: maximum watchpoint size is 8 bytes.<6>Serial: AMBA PL011 UART driver<6>f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2<6>console [ttyAMA0] enabled<6>f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2<6>f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2<6>pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered<6>pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered<6>pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered<6>pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered<6>pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered<6>pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered<6>pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered<6>pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered<6>pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered<6>pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered<4>hisilicon-pcie: probe of f0001000.pcie failed with error -1<6>hisi_iommu_ptable_addr:phy 0x1e800000    size:0x400000<6>hisi_iommu_err_rdaddr :phy 0x1f783600    size:0x200<6>hisi_iommu_err_wraddr :phy 0x1f783800     size:0x200<6>in hisi_iommu_domain_init start <6>in hisi_iommu_domain_init end <6>vgaarb: loaded<5>SCSI subsystem initialized<7>libata version 3.00 loaded.<6>ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022<6>ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000<6>spi_master spi0: will run message pump with realtime priority<6>usbcore: registered new interface driver usbfs<6>usbcore: registered new interface driver hub<6>usbcore: registered new device driver usb<6>media: Linux media interface: v0.10<6>Linux video capture interface: v2.00<6>Advanced Linux Sound Architecture Driver Initialized.<6>clocksource: Switched to clocksource hisp804<5>FS-Cache: Loaded<6>NET: Registered protocol family 2<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)<6>TCP: Hash tables configured (established 4096 bind 4096)<6>UDP hash table entries: 256 (order: 1, 8192 bytes)<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)<6>NET: Registered protocol family 1<6>RPC: Registered named UNIX socket transport module.<6>RPC: Registered udp transport module.<6>RPC: Registered tcp transport module.<6>RPC: Registered tcp NFSv4.1 backchannel transport module.<7>PCI: CLS 0 bytes, default 64<6>NetWinder Floating Point Emulator V0.97 (double precision)<6>hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available<6>futex hash table entries: 1024 (order: 4, 65536 bytes)<5>VFS: Disk quotas dquot_6.6.0<6>VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher<5>NFS: Registering the id_resolver key type<5>Key type id_resolver registered<5>Key type id_legacy registered<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...<6>Installing knfsd (copyright (C) 1996 [email]okir@monad.swb.de[/email]).<5>FS-Cache: Netfs 'cifs' registered for caching<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.<6>fuse init (API version 7.23)<7>yaffs: yaffs built Installing.<6>bounce: pool size: 64 pages<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)<6>io scheduler noop registered<6>io scheduler deadline registered (default)<6>io scheduler cfq registered<6>hiahci-phy: registered new sata phy driver<6>brd: module loaded<6>loop: module loaded<4>ahci: probe of f9900000.hiahci failed with error -1<6>hifmc100: registerd new interface driver hifmc100.<5>hifmc100: Found flash memory controller hifmc100.<6>hifmc100: no found spi-nor device.<6>hifmc100: no found nand device.<6>hifmc100: no found spi-nand device.<6>FEPHY:addr=2, la_am=0xe, ldo_am=0x3, r_tuning=0x12<6>libphy: himii: probed<6>hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa v330<6>/soc/ethernet@f9840000/ethernet_phy@0 has invalid PHY address=255<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<6>ehci-pci: EHCI PCI platform driver<6>ehci-platform: EHCI generic platform driver<6>ehci-platform f9890000.ehci: EHCI Host Controller<6>ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1<6>ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000<6>ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00<6>hub 1-0:1.0: USB hub found<6>hub 1-0:1.0: 2 ports detected<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<6>ohci-pci: OHCI PCI platform driver<6>ohci-platform: OHCI generic platform driver<6>ohci-platform f9880000.ohci: Generic Platform OHCI controller<6>ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2<6>ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000<6>hub 2-0:1.0: USB hub found<6>hub 2-0:1.0: 2 ports detected<6>xhci-hcd f98a0000.xhci: xHCI Host Controller<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3<6>xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00030010<6>xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000<6>hub 3-0:1.0: USB hub found<6>hub 3-0:1.0: 1 port detected<6>xhci-hcd f98a0000.xhci: xHCI Host Controller<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4<6>usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.<6>hub 4-0:1.0: USB hub found<6>hub 4-0:1.0: 1 port detected<6>usbcore: registered new interface driver uas<6>usbcore: registered new interface driver usb-storage<6>mousedev: PS/2 mouse device common for all mice<6>usbcore: registered new interface driver xpad<6>i2c /dev entries driver<6>IR NEC protocol handler initialized<6>IR RC5(x/sz) protocol handler initialized<6>IR RC6 protocol handler initialized<6>IR JVC protocol handler initialized<6>IR Sony protocol handler initialized<6>IR SANYO protocol handler initialized<6>IR Sharp protocol handler initialized<6>IR MCE Keyboard/mouse protocol handler initialized<6>IR XMP protocol handler initialized<6>sp805-wdt f8a2c000.watchdog: registration successful<4>registered new interface driver himciV2.0_4.4.35_20170401<6>mmc0: MAN_BKOPS_EN bit is not set<4>scan edges:2 p2f:6 f2p:1<4>mix set temp-phase 3<4>scan elemnts: startp:10 endp:127<5>Tuning SampleClock. mix set phase:[04/07] ele:[04/16] <6>mmc0: new HS400 MMC card at address 0001<6>mmcblk0: mmc0:0001 8GTF4R 7.28 GiB <6>mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB<6>mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB<6>usb 2-2: new full-speed USB device number 2 using ohci-platform<6>mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB<6> mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(bootoptions) p5(deviceinfo) p6(baseparam) p7(pqparam) p8(logo) p9(fastplay) p10(kernel) p11(trustedcore) p12(misc) p13(system) p14(vendor) p15(e2tv) p16(cache) p17(private) p18(securestore) p19(linuxkernel1) p20(linuxkernel2) p21(linuxkernel3) p22(linuxkernel4) p23(userdata)<5>f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!<5>f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!<6>usbcore: registered new interface driver usbhid<6>usbhid: USB HID core driver<6>ashmem: initialized<6>usbcore: registered new interface driver snd-usb-audio<6>oprofile: using timer interrupt.<6>Netfilter messages via NETLINK v0.30.<6>nfnl_acct: registering with nfnetlink.<6>ip_tables: (C) 2000-2006 Netfilter Core Team<6>arp_tables: (C) 2002 David S. Miller<6>NET: Registered protocol family 10<6>NET: Registered protocol family 17<5>Key type dns_resolver registered<5>Registering SWP/SWPB emulation handler<6>ALSA device list:<6>  No soundcards found.<6>Freeing unused kernel memory: 556K (c0a99000 - c0b24000)<4>This architecture does not have kernel memory protection.<4>EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended<6>EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)<4>FAT-fs (mmcblk0p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<5>random: nonblocking pool is initialized<6>usbcore: registered new interface driver tpm<6>hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input1<6>input: rc mouse emulation as /devices/virtual/input/input2<6>DVB: registering new adapter (dvb0)<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...<6>platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...<4>Mali: Mali device driver loaded<4>tntfs: module license 'Commercial. For support email [email]ntfs-support@tuxera.com[/email].' taints kernel.<4>Disabling lock debugging due to kernel taint<6>Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].<6>Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm<6>Running on kernel 4.4.35 #1 SMP Wed Jan 27 03:10:59 UTC 2021 armv7l<2>WARNING: Running kernel does not match configured kernel headers the driver was built with!  The driver needs to be rebuilt with the correct kernel headers!<6>SGI XFS with ACLs, security attributes, realtime, no debug enabled<6>EXT4-fs (mmcblk0p23): re-mounted. Opts: data=ordered<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready<6>hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Wir schauen danach sobald es eine Lösung gibt schreiben wir es hier rein.

En mode débogage, j'envoie les derniers messages de plantage

var / log / message:
noyau de débogage: zone normale: 0 pages réservées 19 mai 14:35:59 maxytecmulti user.debug noyau: zone normale: 132096 pages, lot LIFO: 31 mai 19 14:35:59 maxytecmulti user.debug noyau: zone HighMem: 107776 pages, LIFO batch: 31 mai 19 14:35:59 maxytecmulti user.info noyau: PERCPU: Embedded 13 pages / cpu @ dfc5d000 s22604 r8192 d22452 u53248 May 19 14:35:59 maxytecmulti user.debug noyau: pcpu-alloc: s22604 =. u53 d2192 * 4096May 19 14:35:59 maxytecmulti user.debug noyau: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 May 19 14:35:59 maxytecmulti user.info noyau: Construit 1 zonelists dans l'ordre des zones, regroupement de mobilité activé. Nombre total de pages: 238840 19 mai 14:35:59 maxytecmulti user.notice noyau: Ligne de commande du noyau: root = / dev / mmcblk0p23 rootsubdir = linuxrootfs3 rootfstype = ext4 kernel = / dev / mmcblk0p21 console = ttyAMA0,115200 blkdevkbl0parts = 1 ), 59 maxytecmulti user.notice noyau: Type de clé id_legacy registeredMay 19 14:35:59 maxytecmulti user.info noyau: nfs4filelayout_init: Enregistrement du pilote de disposition de fichier NFSv4 ... 19 mai 14:35:59 maxytecmulti user.info noyau: installation de knfsd (copyright (C) 1996 Link nur für registrierte und freigeschaltete Mitglieder sichtbar. ) .Mai 19 14:35:59 maxytecmulti user.notice noyau: FS-Cache: Netfs 'cifs' enregistré pour la mise en cacheMay 19 14:35:59 maxytecmulti user.info noyau: jffs2 : version 2.2. (NAND) © 2001-2006 Red Hat, Inc. 19 mai 14:35:59 maxytecmulti user.info noyau: fuse init (API version 7.23) 19 mai 14:35:59 maxytecmulti user.debug noyau: yaffs: yaffs built Installation 19 mai 14:35:59 maxytecmulti user.info noyau: bounce: taille du pool: 64 pages 19 mai 14:35:59 maxytecmulti user.info noyau: couche de bloc pilote SCSI générique (bsg) version 0.4 chargé (major 252) 19 mai 14:35:59 utilisateur maxytecmulti. Gestionnaire de protocole clavier / souris IR MCE initialisé 19 mai 14:35:59 maxytecmulti user.info noyau: gestionnaire de protocole IR XMP initialisé 19 mai 14:35:59 maxytecmulti user.info noyau: sp805-wdt f8a2c000.watchdog: enregistrement réussi 19 mai 14:35 : 59 maxytecmulti user.warn noyau: nouveau pilote d'interface enregistré himciV2.0_4.4.35_20170401May 19 14:35:59 maxytecmulti user.info noyau: mmc0: MAN_BKOPS_EN bit n'est pas défini May 19 14:35:59 maxytecmulti user.warn noyau: scan bords: 2 p2f: 6 f2p: 1Mai 19 14:35:59 maxytecmulti user.warn kernel: mix set temp-phase 3 Mai 19 14:35:59 maxytecmulti user.warn kernel: scan elemnts: startp: 8 endp: 126 May 19 14 : 35: 59 maxytecmulti user.notice kernel: Réglage de SampleClock. mix set phase: [04/07] ele: [03/16] May 19 14:35:59 maxytecmulti user.info noyau: mmc0: nouvelle carte HS400 MMC à l'adresse 0001 May 19 14:35:59 maxytecmulti user. EXT4-fs (mmcblk0p23): système de fichiers monté avec mode données ordonnées. Opts: (null) May 19 14:35:59 maxytecmulti user.warn noyau: FAT-fs (mmcblk0p4): Le volume n'a pas été correctement démonté. Certaines données peuvent être corrompues. Veuillez exécuter fsck.May 19 14:35:59 maxytecmulti user.notice noyau: random: le pool non bloquant est initialiséMay 19 14:35:59 maxytecmulti user.info noyau: usbcore: nouveau pilote d'interface enregistré tpmMay 19 14:35:59 utilisateur maxytecmulti .info noyau: hisi-sndcard hisi-sndcard: aiao-hifi <-> cartographie hisi-i2s okMay 19 14:35:59 maxytecmulti user.info noyau: entrée: commande à distance avancée dreambox (native) comme / devices / virtual / input / input1May 19 14:35:59 maxytecmulti user.info noyau: input: émulation de souris rc comme / devices / virtual / input / input2May 19 14:35:59 maxytecmulti user.info noyau: DVB: enregistrement d'un nouvel adaptateur (dvb0) 19 mai 14h35: 59 maxytecmulti user.info noyau: plateforme dvb0.0: DVB: enregistrement de l'adaptateur 0 frontend 0 (DVB-S2) ... 19 mai 14:35:59 maxytecmulti user.info noyau: plateforme dvb0.0: DVB: enregistrement de l'adaptateur 0 frontend 1 (DVB-S2) ... 19 mai 14:35:59 maxytecmulti user.warn noyau: Mali: pilote de périphérique Mali chargé 19 mai 14:35:59 maxytecmulti user.warn noyau: tntfs: licence de module 'Commercial. Pour le support, envoyez un e-mail à Link nur für registrierte und freigeschaltete Mitglieder sichtbar. . ' taints kernel.May 19 14:35:59 maxytecmulti user.warn kernel: Désactivation du débogage de verrouillage en raison d'une altération du noyauMay 19 14:35:59 maxytecmulti user.info noyau: pilote Tuxera NTFS 3017.7.4.6 [Flags: MODULE R / W]. May 19 14:35:59 maxytecmulti user.info kernel: Construit avec les en-têtes 4.4.35_hi3798mv2x # 1 SMP Tue Dec 12 14:16:24 CST 2017 armMay 19 14:35:59 maxytecmulti user.info kernel: Running on kernel 4.4. 35 # 1 SMP mer.27 janvier 03h10: 59 UTC 2021 armv7lMay 19 14:35:59 maxytecmulti user.crit noyau: AVERTISSEMENT: le noyau en cours d'exécution ne correspond pas aux en-têtes de noyau configurés avec lesquels le pilote a été construit! Le pilote doit être reconstruit avec les en-têtes de noyau corrects! 19 mai 14:35:59 maxytecmulti user.info noyau: SGI XFS avec ACL, attributs de sécurité, temps réel, pas de débogage activé 19 mai 14:35:59 maxytecmulti noyau user.info: EXT4-fs (mmcblk0p23): remonté. Opts: data = ordonné 19 mai 14:35:59 maxytecmulti user.info noyau: IPv6: ADDRCONF (NETDEV_UP): eth0: le lien n'est pas prêt 19 mai 14:35:59 maxytecmulti user.info noyau: hieth f9c30000.hieth eth0: le lien est Up - 100Mbps / Full - contrôle de flux rx / txMai ​​19 14:35:59 maxytecmulti user.info noyau: IPv6: ADDRCONF (NETDEV_CHANGE): eth0: le lien devient prêtMay 19 14:35:59 maxytecmulti local0.notice udpxy [2025]: udpxy 1.0-25.1 (prod) lean [Linux 4.4. 59 maxytecmulti cron.info crond [2040]: (CRON) INFO (RANDOM_DELAY sera mis à l'échelle avec un facteur de 23% s'il est utilisé.) 19 mai 14:36:00 maxytecmulti daemon.info avahi-daemon [2031]: Démarrage du serveur terminé. Le nom d'hôte est maxytecmulti.local. Le cookie de service local est 1156454984.May 19 14:36:00 maxytecmulti daemon.info avahi-daemon [2031]: Service "Serveur de fichiers FTP sur maxytecmulti" (/services/ftp.service) établi avec succès.May 19 14:36:22 maxytecmulti daemon.notice ntpdate [1966]: step time server 41.220.128.73 offset +16.659291 secMay 19 14:36:22 maxytecmulti daemon.notice stb-hwclock: L'heure actuelle du système a été écrite dans le pseudo RTC FP.Mai 19 14:47: 43 maxytecmulti user.info noyau: EXT4-fs (mmcblk0p15): système de fichiers monté avec mode données ordonnées. Opts: (null) 19 mai 14:48:33 maxytecmulti authpriv.info login [2533]: pam_unix (login: session):

dmesg:
Intégré 13 pages / cpu @ dfc5d000 s22604 r8192 d22452 u53248pcpu-alloc: s22604 r8192 d22452 u53248 alloc = 13 * 4096pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Listes de zones construites dans l'ordre des zones, regroupement de mobilité sur. Nombre total de pages: 238840 Ligne de commande du noyau: root = / dev / mmcblk0p23 rootsubdir = linuxrootfs3 rootfstype = ext4 kernel = / dev / mmcblk0p21 console = ttyAMA0,115200 blkdevparts = mmcblk0: 1M (démarrage rapide), 1M (bootargs), 2M (récupération), 2M (options de démarrage), 2M (deviceinfo), 4M (baseparam), 4M (pqparam), 4M (logo), 40M (fastplay), 20M (noyau), 20M (trustcore), 4M (misc), 1024M (système), 150M (fournisseur), 306M (e2tv), 256M (cache), 50M (privé), 8M (securestore), 16M (linuxkernel1), 16M (linuxkernel2), 16M (linuxkernel3), 16M (linuxkernel4), - (userdata) hbcomp = / dev / block / mmcblk0p13 mem = 937M mmz = ddr, 0,0,60M vmalloc = 500Mlog_buf_len Contribution individuelle maximale au processeur: 4096 octetslog_buf_len Total des contributions cpu_extra: data: 0xc0b24000 - 0xc0bd03ac (689 ko) .bss: 0xc0bd2000 - 0xc0c54910 (523 ko) SLUB: HWalign = 64, Order = 0-3, MinObjects = 0, CPUs = 4, Nodes = 1 Implémentation RCU hiérarchique. Ajustement au moment de la construction de l'épanouissement de la feuille à 32.NR_IRQS: 352clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 nssched_clock: 32 bits à 24MHz, résolution 41ns, enveloppe chaque 8947848.304971nsConsole loop: color dummyj2 ) pid_max: par défaut: 32768 minimum: 301 Entrées de la table de hachage de Mount-cache: 1024 (ordre: 0, 4096 octets) Entrées de la table de hachage de Mountpoint-cache: 1024 (ordre: 0, 4096 octets) CPU: Test de cohérence du tampon d'écriture: okftrace: allocation 26411 entrées dans 78 pagesCPU0: mise à jour cpu_capacity 1024CPU0: thread -1, cpu 0, socket 0, 1 module de transport de canal arrière.PCI: CLS 0 octets, par défaut 64 NetWinder Floating Point Emulator V0.97 (double précision) hw perfevents: activé avec le pilote PMU armv7_cortex_a17, 7 compteurs disponibles Entrées de table de hachage futex: 1024 (ordre: 4, 65536 octets) VFS: Quotas de disque dquot_6.6.0VFS: Entrées de la table de hachage Dquot-cache: 1024 (ordre 0, 4096 octets) squashfs: version 4.0 (2009/01/31) Phillip LougherNFS: Enregistrement du type de clé id_resolver Type de clé id_resolver registeredType de clé id_legacy registerednfs4filelayout_init: Fichier NFSv4 Enregistrement du pilote de mise en page ... Installation de knfsd (copyright (C) 1996 Link nur für registrierte und freigeschaltete Mitglieder sichtbar. ) .FS-Cache: Netfs 'cifs' enregistré pour la mise en cachejffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) yaffs: yaffs built Installing.bounce: taille du pool: 64 pagesBlock layer Pilote SCSI générique (bsg) version 0. chien de garde: enregistrement réussienregistré nouveau pilote d'interface himciV2.0_4.4.35_20170401mmc0: le bit MAN_BKOPS_EN n'est pas setscan arêtes: 2 p2f: 6 f2p: 1mix set temp-phase 3scan elemnts: startp: 8 endp: 126Tuning SampleClock. mix set phase: [04/07] ele: [03/16] mmc0: nouvelle carte HS400 MMC à l'adresse 0001mmcblk0: mmc0: 0001 8GTF4R 7,28 Gio mmcblk0boot0: mmc0: 0001 8GTF4R partition 1 4,00 MiBmmcblk0boot1: mmc0F MiBp: 0001 8Gmbm : 0001 8GTF4R partition 3 512 Kio mmcblk0: p1 (fastboot) p2 (bootargs) p3 (récupération) p4 (bootoptions) p5 (deviceinfo) p6 (baseparam) p7 (pqparam) p8 (logo) p9 (fastplay) p10 (noyau) p11 (confiance) p12 (misc) p13 (système) p14 (fournisseur) p15 (e2tv) p16 (cache) p17 (privé) p18 (securestore) p19 (linuxkernel1) p20 (linuxkernel2) p21 (linuxkernel3) p22 (linuxkernel4) p23 (utilisateur données) usb 2-2: il est recommandé d'exécuter e2fsck EXT4-fs (mmcblk0p23): système de fichiers monté avec mode données ordonnées. Opts: (null) FAT-fs (mmcblk0p4): le volume n'a pas été correctement démonté. Certaines données peuvent être corrompues. Veuillez exécuter fsck.random: le pool non bloquant est initialiséusbcore: nouveau pilote d'interface enregistré tpmhisi-sndcard hisi-sndcard: aiao-hifi <-> cartographie hisi-i2s okinput: dreambox Advanced Remote Control (native) as / devices / virtual / input / input1input : émulation de souris rc en tant que / devices / virtual / input / input2DVB: enregistrement d'un nouvel adaptateur (dvb0) plateforme dvb0.0: DVB: enregistrement de l'adaptateur 0 frontend 0 (DVB-S2) ... plateforme dvb0.0: DVB: enregistrement de l'adaptateur 0 frontend 1 (DVB-S2) ... Mali: pilote de périphérique Mali chargé tntfs: licence de module 'Commercial. Pour le support, envoyez un e-mail à Link nur für registrierte und freigeschaltete Mitglieder sichtbar. . ' Désactivation du débogage de verrouillage en raison du noyau taintTuxera NTFS driver 3017. 7.4.6 [Flags: R / W MODULE] .Construit contre les en-têtes 4.4.35_hi3798mv2x # 1 SMP Mar 12 décembre 14:16:24 CST 2017 armRunning on kernel 4.4.35 # 1 SMP Wed 27 Jan 03:10:59 UTC 2021 armv7l AVERTISSEMENT: le noyau en cours d'exécution ne correspond pas aux en-têtes de noyau configurés avec lesquels le pilote a été construit! Le pilote doit être reconstruit avec les en-têtes de noyau appropriés! SGI XFS avec ACL, attributs de sécurité, temps réel, pas de débogage activé EXT4-fs (mmcblk0p23): remonté. Opts: données = ordonnées remonté. Opts: données = ordonnées remonté. Opts: données = ordonnées

der Fehler ist nachstellbar und ein Fix kommt.

@Link nur für registrierte und freigeschaltete Mitglieder sichtbar. : Problem wurde lokalisiert und behoben. Willst du es bei Dir lokal testen ( Datei per FTP tauschen ) oder wartest du auf ein Update des 6.5 ( Zeitpunkt unbestimmt )

noch nichts geplant. Kannst du die Datei mit einem FTP-Programm tauschen? Alternativ geht es auch per Fileload über das Webinterface. Ich würde dann die Datei hier hochladen

anbei die Datei zu tauschen und testen ( zip entpacken ).
vorhandene AVSwitch.py sichern ( man weiß ja nie ) und dann die AVSwitch.py aus dem zip reinkopieren. Benutzeroberfläche neu starten und testen

Pfad im Image : /usr/lib/enigma2/python/Components