Thema: Probleme mit Kodi, Mediaportal, Plugininstallation

Aber nicht mit Python3

Hallo, ich weiß nicht ob am Feed sich was getan hat, aber ich konnte nun Kodi erfolgreich installieren.
Aber will ich Kodi starten, wird der Bildschirm schwarz und der Receiver startet neu.
Hier der Crashlog, wenn sich es jemand anschauen will

openNFR Enigma2 crash log

crashdate=Mo Jan 17 19:00:09 2022
compiledate=Nov 21 2021
skin=skin_default/skin.xml
sourcedate=2021-11-18
branch=7.0
rev=5073f63
component=Enigma2

stbmodel=gigablue
stbmodel=gbue4k
stbmodel=gbue4k
kernelcmdline=root=/dev/mmcblk0p7 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m
nimsockets=NIM Socket 0:
imageversion=box_type=gbue4k
imageissue=opennfr 7.0 %h


tControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] 1 option(s) at position 192
[eDVBSatelliteEquipmentControl] sat 192 found
ret1 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 8
[eDVBSatelliteEquipmentControl] final score 0
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 16
[eDVBSatelliteEquipmentControl] final score 0
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 32
[eDVBSatelliteEquipmentControl] final score 0
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 64
[eDVBSatelliteEquipmentControl] final score 0
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 128
[eDVBSatelliteEquipmentControl] final score 0
tune tuner 0
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] 1 option(s) at position 192
[eDVBSatelliteEquipmentControl] sat 192 found
ret1 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11720000 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
tuning to 1120 MHz
[eDVBChannel] OURSTATE: tuner 0 tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:16:1C:3:85:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[ePicLoad] decode thread ... got quit msg
[Screen] Showing screen 'InfoBarSummary'.
[SEC] set static current limiting
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[SEC] invalidate current switch params
[eDVBFrontend] [SEC] tuner 0 setVoltage 2
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[eDVBFrontend] [SEC] tuner 0 sleep 10ms
[SEC] update current switch params
[SEC] tuner 0 startTuneTimeout 5000
[SEC] tuner 0 setFrontend: events enabled
setting frontend 0 events: on
[eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend] [SEC] tuner 0 sleep 500ms
[eRCDeviceInputDev] 0 160 1
KEY: 352 1 KEY_OK OK
[eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: tuner 0 ok
[eDVBLocalTimerHandler] channel 0x1754818 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=20
[EPGCache] channel 0x1754818 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[EPGCache] next update in 2 sec
[eDVBServicePlay] have 1 video stream(s) (04ff), and 1 audio stream(s) (0500), and the pcr pid is 04ff, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eDVBServicePlay] Setting audio delay: setAC3Delay, 0 + 0
[eDVBServicePlay] Setting audio delay: setPCMDelay, 0 + 0
[eTSMPEGDecoder] decoder state: play, vpid=04ff, apid=0500
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x04ff ok[eDVBPCR0] DEMUX_START ok[eDVBAudio0] DMX_SET_PES_FILTER pid=0x0500 ok[eDVBAudio0] DEMUX_START ok[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok[eDVBAudio0] AUDIO_PAUSE ok[eDVBAudio0] AUDIO_PLAY ok[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok[eDVBVideo0] DMX_SET_PES_FILTER pid=0x04ff ok[eDVBVideo0] DEMUX_START ok[eDVBVideo0] VIDEO_FREEZE ok[eDVBVideo0] VIDEO_PLAY ok[eDVBVideo0] VIDEO_SLOWMOTION 0 ok[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok[eDVBVideo0] VIDEO_CONTINUE ok[eDVBAudio0] AUDIO_CONTINUE ok[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
setPixmapNum(0) failed! defined pixmaps: []
[eDVBServicePlay] timeshift
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 62ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 46ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBCAService] new service 1:0:16:1C:3:85:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:16:1C:3:85:C00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 46ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBServicePlay] timeshift
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[SEC] set dynamic current limiting
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 0x0 aspect 2
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 64ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 65535 fps
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 1
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] PAT TSID: 0x0003 (3)
[eDVBServicePMTHandler] use pmtpid 0064 for service_id 001c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=99
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=98
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=97
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (04ff), and 2 audio stream(s) (0500, 0501), and the pcr pid is 04ff, and the text pid is ffffffff
[eDVBServicePlay] Setting audio delay: setAC3Delay, 0 + 0
[eDVBServicePlay] Setting audio delay: setPCMDelay, 0 + 0
[eTSMPEGDecoder] decoder state: play, vpid=04ff, apid=0500
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok[eDVBVideo0] VIDEO_CONTINUE ok[eDVBAudio0] AUDIO_CONTINUE ok[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 44ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 44ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 44ms
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=102
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=100
[eDVBServicePlay] timeshift
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=103
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=145
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=144
[eDVBServicePlay] timeshift
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 91ms
[eDVBSectionReader] DMX_SET_FILTER pid=211
[eDVBSectionReader] DMX_SET_FILTER pid=561
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=700
[eDVBSectionReader] DMX_SET_FILTER pid=700
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eDVBLocalTimerHandler] Transponder time is 17.01.2022 18:48:48
[eDVBLocalTimerHandler] diff is -2
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] Boxtype = [gbue4k]
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 18:48:48
[eDVBLocalTimerHandler] m_time_difference is -2
[eDVBLocalTimerHandler] slewing Linux Time by -02 seconds
[eDVBChannel] getDemux cap=00
[eDVBServicePMTHandler] sdt update done!
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 704x576 aspect 2
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 64ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 46ms
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 46ms
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 62ms
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 63ms
[EPGCache] abort non avail schedule other reading
[EPGCache] abort non avail virgin nownext reading
[EPGCache] abort non avail virgin schedule reading
[EPGCache] abort non avail netmed schedule reading
[EPGCache] abort non avail netmed schedule other reading
[EPGCache] abort non avail FreeSat schedule_other reading
[EPGCache] abort non avail viasat reading
[EPGCache] abort non avail mhw reading
[EPGCache] nownext finished(1642441737)
[EPGCache] schedule finished(1642441739)
[EPGCache] next update in 60 min
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 64ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 44ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 46ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SNR', potential driver issue, 65ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBServicePlay] timeshift
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 60ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 46ms
[eDVBFrontend] Slow ioctl 'FE_READ_SIGNAL_STRENGTH', potential driver issue, 45ms
[eDVBServicePlay] timeshift
[eRCDeviceInputDev] 1 190 1
KEY: 400 0 KEY_YELLOW YELLOW
[eRCDeviceInputDev] 0 190 1
KEY: 400 1 KEY_YELLOW YELLOW
[ActionMap] Keymap 'HotkeyActions' -> Unknown action 'yellow'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Unknown action 'extensions'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Unknown action 'extensions'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Unknown action 'extensions'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Unknown action 'extensions'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Unknown action 'extensions'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Unknown action 'extensions'! (Typo in keymap?)
[ActionMap] Keymap 'InfobarExtensions' -> Action = 'extensions'.
[Screen] Warning: Skin is missing element 'windowtitle' in <class 'Screens.ChoiceBox.ChoiceBox'>.
[Screen] Showing screen '['ExtensionsList_summary', 'ChoiceBox_summary', 'SimpleSummary']'.
[Screen] Showing screen '['ExtensionsList', 'ChoiceBox']'.
[eRCDeviceInputDev] 1 6c 1
KEY: 108 0 KEY_DOWN DOWN
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[eRCDeviceInputDev] 0 6c 1
KEY: 108 1 KEY_DOWN DOWN
[eRCDeviceInputDev] 1 6c 1
KEY: 108 0 KEY_DOWN DOWN
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[eRCDeviceInputDev] 0 6c 1
KEY: 108 1 KEY_DOWN DOWN
[eRCDeviceInputDev] 1 6c 1
KEY: 108 0 KEY_DOWN DOWN
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[eRCDeviceInputDev] 0 6c 1
KEY: 108 1 KEY_DOWN DOWN
[eRCDeviceInputDev] 1 6c 1
KEY: 108 0 KEY_DOWN DOWN
[ActionMap] Keymap 'WizardActions' -> Action = 'down'.
[eRCDeviceInputDev] 0 6c 1
KEY: 108 1 KEY_DOWN DOWN
[eRCDeviceInputDev] 1 160 1
KEY: 352 0 KEY_OK OK
[ActionMap] Keymap 'WizardActions' -> Action = 'ok'.
[Screen] Showing screen 'InfoBarSummary'.
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[AVSwitch] setMode - port: HDMI, mode: 1080p, rate: 50Hz
[KodiLauncher] RCUnlock
[eRCInputEventDriver] EVIOCGRAB: Device or resource busy
[KodiLauncher] RCLock
[eDVBCAService] free slot 0 demux 0 for service 1:0:16:1C:3:85:C00000:0:0:0:
[eDVBCAService] free service 1:0:16:1C:3:85:C00000:0:0:0:
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP ok[eDVBVideo0] VIDEO_STOP ok[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok[eDVBAudio0] DEMUX_STOP ok[eDVBAudio0] AUDIO_CONTINUE ok[eDVBAudio0] destroy
[eDVBResourceManager] start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'KodiLauncher'>
[Screen] Showing screen '['KodiLauncher_summary', 'SimpleSummary']'.
[Screen] Showing screen 'KodiLauncher'.
[eConsoleAppContainer] Starting /bin/sh
[KodiLauncher] FBLock
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
return self.fnc(*self.args + args, **newkwargs)
File "/usr/lib/enigma2/python/Components/Console.py", line 60, in finishedCB
self.callbacks[name](data,retval,extra_args)
File "/usr/lib/enigma2/python/Plugins/Extensions/Kodi/plugin.py", line 872, in psCallback
procs = data.split(b'\n')
TypeError: must be str or None, not bytes
[ePyObject] (PyObject_CallObject(<Tools.BoundFunction.boundFunction object at 0xb04aa2b0>,(1,)) failed)
getResolvedKey config.crash.bsodpython failed !! (Typo??)
getResolvedKey config.crash.bsodhide failed !! (Typo??)
getResolvedKey config.crash.bsodmax failed !! (Typo??)


dmesg

<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 11.2.0 (GCC) ) #1 SMP Thu Sep 23 02:54:03 UTC 2021
<6>[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[ 0.000000] Machine model: gbue4k
<6>[ 0.000000] moving dtb from 0x0000000007624000 to 0x00000000009b6be0
<6>[ 0.000000] bmem: Reserved 529 MiB at 0x000000001eb00000
<6>[ 0.000000] bmem: Reserved 608 MiB at 0x000000009a000000
<6>[ 0.000000] cma: Reserved 16 MiB at 0x0000000098c00000
<4>[ 0.000000] Forcing write-allocate cache policy for SMP
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 524288
<7>[ 0.000000] DMA zone: 964 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 123392 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 400896 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 12 pages/cpu @dd1ab000 s17164 r8192 d23796 u49152
<7>[ 0.000000] pcpu-alloc: s17164 r8192 d23796 u49152 alloc=12*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523324
<5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p7 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 889372K/2097152K available (6826K kernel code, 329K rwdata, 2212K rodata, 320K init, 214K bss, 1191396K reserved, 16384K cma-reserved, 422904K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5>[ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xde300000 ( 483 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc08dbd4c (9040 kB)
<5>[ 0.000000] .init : 0xc08dc000 - 0xc092c000 ( 320 kB)
<5>[ 0.000000] .data : 0xc092c000 - 0xc097e498 ( 330 kB)
<5>[ 0.000000] .bss : 0xc0981000 - 0xc09b6be0 ( 215 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde802000, parent irq: 93)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde808000, parent irq: 64)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80aa00, parent irq: 65)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80c640, parent irq: 95)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80e200, parent irq: 58)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xde810380, parent IRQ(s): 3)
<6>[ 0.000000] MCP: Enabling write pairing
<6>[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[ 0.000009] Switching to timer-based delay loop, resolution 37ns
<6>[ 0.000354] Console: colour dummy device 80x30
<6>[ 0.000371] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[ 0.000380] pid_max: default: 32768 minimum: 301
<6>[ 0.000479] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000483] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000963] CPU: Testing write buffer coherency: ok
<6>[ 0.001130] CPU0: update cpu_capacity 1024
<6>[ 0.001137] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.001343] Setting up static identity map for 0x8480 - 0x84d8
<6>[ 0.004112] CPU1: update cpu_capacity 1024
<6>[ 0.004116] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.004170] Brought up 2 CPUs
<6>[ 0.004181] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[ 0.004186] CPU: All CPU(s) started in SVC mode.
<6>[ 0.004518] devtmpfs: initialized
<6>[ 0.013517] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[ 0.013743] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.015007] NET: Registered protocol family 16
<6>[ 0.015638] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[ 0.021154] cpuidle: using governor ladder
<6>[ 0.030164] cpuidle: using governor menu
<6>[ 0.037114] No ATAGs?
<6>[ 0.037144] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.037151] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ 0.037377] Broadcom Brahma-B15 readahead cache at: 0xde954478
<6>[ 0.050906] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
<6>[ 0.051113] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
<5>[ 0.051610] SCSI subsystem initialized
<7>[ 0.052123] libata version 3.00 loaded.
<6>[ 0.052326] usbcore: registered new interface driver usbfs
<6>[ 0.052379] usbcore: registered new interface driver hub
<6>[ 0.052419] usbcore: registered new device driver usb
<6>[ 0.052489] Linux video capture interface: v2.00
<6>[ 0.052679] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.052684] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 0.052705] PTP clock support registered
<6>[ 0.053103] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.054510] Switched to clocksource arch_sys_counter
<5>[ 0.054739] FS-Cache: Loaded
<4>[ 0.061453] thermal thermal_zone0: failed to read out thermal zone (-22)
<6>[ 0.061594] NET: Registered protocol family 2
<6>[ 0.061914] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.061936] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.061975] TCP: Hash tables configured (established 4096 bind 4096)
<6>[ 0.062016] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.062028] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.062131] NET: Registered protocol family 1
<6>[ 0.062402] RPC: Registered named UNIX socket transport module.
<6>[ 0.062408] RPC: Registered udp transport module.
<6>[ 0.062411] RPC: Registered tcp transport module.
<6>[ 0.062414] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.062427] PCI: CLS 0 bytes, default 64
<4>[ 0.062746] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>[ 0.062774] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[ 0.063563] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[ 0.064669] NFS: Registering the id_resolver key type
<5>[ 0.064695] Key type id_resolver registered
<5>[ 0.064699] Key type id_legacy registered
<6>[ 0.064711] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.064717] Installing knfsd (copyright (C) 1996 Link nur für registrierte und freigeschaltete Mitglieder sichtbar. ).
<5>[ 0.064859] FS-Cache: Netfs 'cifs' registered for caching
<5>[ 0.064904] Key type cifs.spnego registered
<6>[ 0.065024] fuse init (API version 7.23)
<6>[ 0.066298] bounce: pool size: 64 pages
<6>[ 0.066339] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 0.066348] io scheduler noop registered
<6>[ 0.066354] io scheduler deadline registered
<6>[ 0.066364] io scheduler cfq registered (default)
<6>[ 0.066612] brcm-gisb-arb f0400000.gisb-arb: registered mem: de97c000, irqs: 261, 262
<6>[ 0.067251] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
<6>[ 0.067606] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<6>[ 0.167783] brcm-pci f0460000.pcie: link down
<6>[ 0.167840] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
<6>[ 0.268016] brcm-pci f0490000.pcie: link down
<6>[ 0.269347] brcmstb_memc f1102000.memc-ddr: registered
<6>[ 0.269386] brcmstb_memc f1182000.memc-ddr: registered
<6>[ 0.269589] brcm-waketimer f0417580.waketimer: registered, with irq 263
<6>[ 0.269793] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.270887] console [ttyS0] disabled
<6>[ 0.270918] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>[ 1.007616] console [ttyS0] enabled
<6>[ 1.011497] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
<6>[ 1.020768] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
<6>[ 1.033043] loop: module loaded
<6>[ 1.037091] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
<4>[ 1.044515] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
<6>[ 1.050562] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[ 1.068504] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[ 1.077489] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[ 1.086956] scsi host0: brcm-ahci
<6>[ 1.090524] scsi host1: brcm-ahci
<5>[ 1.093999] ata1: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 1.099063] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<5>[ 1.106994] ata2: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 1.112055] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>[ 1.119990] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[ 1.127024] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
<3>[ 1.132666] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
<4>[ 1.138702] brcmstb_qspi: probe of f03e3400.spi failed with error -22
<6>[ 1.145180] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
<4>[ 1.151326] m25p80 spi32766.0: found mx25l3205d, expected m25p80
<6>[ 1.157361] m25p80 spi32766.0: mx25l3205d (4096 Kbytes)
<5>[ 1.162634] 5 ofpart partitions found on MTD device spi32766.0
<5>[ 1.168491] Creating 5 MTD partitions on "spi32766.0":
<5>[ 1.173653] 0x000000000000-0x000000100000 : "flash0.bolt"
<5>[ 1.179628] 0x000000100000-0x000000110000 : "flash0.macadr"
<5>[ 1.185668] 0x000000110000-0x000000120000 : "flash0.nvram"
<5>[ 1.191601] 0x000000120000-0x000000130000 : "flash0.devtree"
<5>[ 1.197705] 0x000000000000-0x000000400000 : "flash0"
<6>[ 1.203733] libphy: Fixed MDIO Bus: probed
<6>[ 1.208264] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<4>[ 1.214157] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
<6>[ 1.233487] libphy: bcmgenet MII bus: probed
<6>[ 1.233497] ata1: SATA link down (SStatus 0 SControl 320)
<6>[ 1.263315] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[ 1.269168] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
<6>[ 1.275303] xhci-brcm: xHCI BRCM driver
<6>[ 1.293977] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[ 1.299756] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>[ 1.307823] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
<6>[ 1.316728] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>[ 1.323352] hub 1-0:1.0: USB hub found
<3>[ 1.327138] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[ 1.334406] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[ 1.340167] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>[ 1.348058] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[ 1.348502] ata2: SATA link down (SStatus 0 SControl 320)
<6>[ 1.361928] hub 2-0:1.0: USB hub found
<6>[ 1.365707] hub 2-0:1.0: 2 ports detected
<6>[ 1.370080] ehci-brcm: EHCI BRCM driver
<6>[ 1.374048] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>[ 1.379825] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>[ 1.397790] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>[ 1.409496] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.416073] hub 3-0:1.0: USB hub found
<6>[ 1.419851] hub 3-0:1.0: 1 port detected
<6>[ 1.424013] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>[ 1.429780] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>[ 1.447720] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>[ 1.459494] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.466037] hub 4-0:1.0: USB hub found
<6>[ 1.469897] hub 4-0:1.0: 1 port detected
<6>[ 1.474103] ohci-brcm: OHCI BRCM driver
<6>[ 1.478032] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>[ 1.483805] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>[ 1.491714] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>[ 1.552857] hub 5-0:1.0: USB hub found
<6>[ 1.556637] hub 5-0:1.0: 1 port detected
<6>[ 1.560784] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>[ 1.566563] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>[ 1.574973] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<6>[ 1.635860] hub 6-0:1.0: USB hub found
<6>[ 1.639640] hub 6-0:1.0: 1 port detected
<6>[ 1.643873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.650437] ehci-pci: EHCI PCI platform driver
<6>[ 1.654946] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.661150] ohci-pci: OHCI PCI platform driver
<6>[ 1.665735] usbcore: registered new interface driver usb-storage
<6>[ 1.671931] mousedev: PS/2 mouse device common for all mice
<6>[ 1.677947] i2c /dev entries driver
<6>[ 1.682072] IR NEC protocol handler initialized
<6>[ 1.686622] IR RC5(x/sz) protocol handler initialized
<6>[ 1.691688] IR RC6 protocol handler initialized
<6>[ 1.696234] IR JVC protocol handler initialized
<6>[ 1.700779] IR Sony protocol handler initialized
<6>[ 1.705415] IR SANYO protocol handler initialized
<6>[ 1.710135] IR Sharp protocol handler initialized
<6>[ 1.714856] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 1.720706] IR XMP protocol handler initialized
<6>[ 1.725623] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[ 1.733786] brcmstb-cpufreq f03e257c.cpu-clk-div: registered
<6>[ 1.739682] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.745879] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.750251] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.757112] usb 3-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.757152] sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
<6>[ 1.757155] sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
<6>[ 1.780495] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
<6>[ 1.790086] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
<6>[ 1.796206] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
<6>[ 1.832493] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[ 1.840051] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.845688] usbcore: registered new interface driver usbhid
<6>[ 1.851277] usbhid: USB HID core driver
<6>[ 1.857836] Initializing XFRM netlink socket
<6>[ 1.862200] NET: Registered protocol family 10
<6>[ 1.869787] NET: Registered protocol family 17
<6>[ 1.874279] NET: Registered protocol family 15
<5>[ 1.878896] Key type dns_resolver registered
<5>[ 1.883246] Registering SWP/SWPB emulation handler
<6>[ 1.893300] ALSA device list:
<6>[ 1.896286] No soundcards found.
<6>[ 1.899941] Waiting for root device /dev/mmcblk0p7...
<6>[ 1.912004] hub 3-1:1.0: USB hub found
<6>[ 1.915887] hub 3-1:1.0: 4 ports detected
<6>[ 1.955115] mmc1: MAN_BKOPS_EN bit is not set
<6>[ 1.965802] mmc1: new high speed MMC card at address 0001
<6>[ 1.971450] mmcblk0: mmc1:0001 004GE0 3.69 GiB
<6>[ 1.976063] mmcblk0boot0: mmc1:0001 004GE0 partition 1 2.00 MiB
<6>[ 1.982053] mmcblk0boot1: mmc1:0001 004GE0 partition 2 2.00 MiB
<6>[ 1.990871] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
<3>[ 2.006173] EXT3-fs (mmcblk0p7): error: couldn't mount because of unsupported optional features (2c0)
<4>[ 2.015702] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<6>[ 2.065634] EXT4-fs (mmcblk0p7): recovery complete
<6>[ 2.071356] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
<6>[ 2.080285] VFS: Mounted root (ext4 filesystem) on device 179:7.
<6>[ 2.092403] devtmpfs: mounted
<6>[ 2.095548] Freeing unused kernel memory: 320K (c08dc000 - c092c000)
<6>[ 2.290521] usb 3-1.3: new low-speed USB device number 3 using ehci-brcm
<6>[ 2.447646] input: 2.4G Wireless Keyboard&Mouse as /devices/platform/rdb/f0470300.ehci_v2/usb3/3-1/3-1.3/3-1.3:1.0/0003:040B:2013.0001/input/input0
<6>[ 2.511873] hid-generic 0003:040B:2013.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Wireless Keyboard&Mouse] on usb-f0470300.ehci_v2-1.3/input0
<6>[ 2.540503] input: 2.4G Wireless Keyboard&Mouse as /devices/platform/rdb/f0470300.ehci_v2/usb3/3-1/3-1.3/3-1.3:1.1/0003:040B:2013.0002/input/input1
<6>[ 2.605142] hid-generic 0003:040B:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Wireless Keyboard&Mouse] on usb-f0470300.ehci_v2-1.3/input1
<6>[ 6.459495] usb 3-1.2: new high-speed USB device number 4 using ehci-brcm
<6>[ 6.553361] usb-storage 3-1.2:1.0: USB Mass Storage device detected
<6>[ 6.559834] usb-storage 3-1.2:1.0: Quirks match for vid 152d pid 2329: 8020
<6>[ 6.566940] scsi host2: usb-storage 3-1.2:1.0
<5>[ 7.574242] scsi 2:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS
<5>[ 7.583440] sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>[ 7.589583] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
<5>[ 7.600989] sd 2:0:0:0: [sda] Write Protect is off
<7>[ 7.605853] sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
<3>[ 7.606952] sd 2:0:0:0: [sda] No Caching mode page found
<3>[ 7.612302] sd 2:0:0:0: [sda] Assuming drive cache: write through
<6>[ 7.684968] sda: sda1
<5>[ 7.690727] sd 2:0:0:0: [sda] Attached SCSI disk
<6>[ 8.291766] EXT4-fs (sda1): recovery complete
<6>[ 8.296808] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<5>[ 8.447160] random: python urandom read with 107 bits of entropy available
<5>[ 8.620859] random: nonblocking pool is initialized
<6>[ 8.851325] SGI XFS with security attributes, realtime, no debug enabled
<6>[ 8.875792] model=gb7252
<6>[ 8.878364] displaymodel=UHD UE 4K
<6>[ 8.881782] brand=gigablue
<6>[ 8.884500] displaybrand=GigaBlue
<6>[ 8.887823] platform=N/A
<6>[ 8.890361] imgversion=7.0
<6>[ 8.893075] imgrevision=001
<6>[ 8.895874] imglanguage=N/A
<6>[ 8.898674] developername=opennfr
<6>[ 8.901996] feedsurl=http://dev.nachtfalke.biz/nfr/feeds/7.0
<6>[ 8.907663] distro=opennfr
<6>[ 8.910375] oe=OE-Alliance 5.0
<6>[ 8.913436] kernel=4.1.20-1.9
<6>[ 8.916408] python=3.9
<6>[ 8.918774] mediaservice=N/A
<6>[ 8.921660] multilib=False
<6>[ 8.924380] architecture=cortexa15hf-neon-vfpv4
<6>[ 8.928920] socfamily=bcm7252s
<6>[ 8.931980] blindscanbinary=N/A
<6>[ 8.935127] rctype=502
<6>[ 8.937491] rcname=gb3
<6>[ 8.939856] rcidnum=2
<6>[ 8.942134] smallflash=False
<6>[ 8.945020] middleflash=False
<6>[ 8.947994] imagedir=gigablue/ue4k
<6>[ 8.951401] imagefs=tar.bz2
<6>[ 8.954287] mtdbootfs=mmcblk0p1
<6>[ 8.957433] mtdrootfs=mmcblk0p5
<6>[ 8.960580] mtdkernel=mmcblk0p4
<6>[ 8.963727] rootfile=rootfs.tar.bz2
<6>[ 8.967222] kernelfile=kernel.bin
<6>[ 8.970543] mkubifs=
<6>[ 8.972733] ubinize=
<6>[ 8.974924] forcemode=N/A
<6>[ 8.977550] compiledate=20211121
<6>[ 8.980784] fpu=hard
<6>[ 8.982976] displaytype=colorlcd220
<6>[ 8.986470] transcoding=True
<6>[ 8.989356] multitranscoding=False
<6>[ 8.992764] hdmi=True
<6>[ 8.995042] yuv=False
<6>[ 8.997319] rca=False
<6>[ 8.999597] avjack=False
<6>[ 9.002139] scart=False
<6>[ 9.004593] dvi=False
<6>[ 9.006871] svideo=False
<6>[ 9.009408] hdmihdin=False
<6>[ 9.012121] hdmifhdin=False
<6>[ 9.014920] wol=False
<6>[ 9.017198] wwol=False
<6>[ 9.019563] ci=True
<6>[ 9.021666] vfdsymbol=False
<6>[ 9.024464] fhdskin=True
<6>[ 9.027007] dboxlcd=N/A
<6>[ 9.029459] imageversion=7.0
<6>[ 9.032345] imagebuild=001
<6>[ 9.035057] imagedevbuild=001
<6>[ 9.038031] imagetype=Release
<4>[ 11.081203] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 11.409338] Adding 539644k swap on /dev/mmcblk0p10. Priority:-1 extents:1 across:539644k SS
<4>[ 12.910765] nexus: module license 'Proprietary' taints kernel.
<4>[ 12.916637] Disabling lock debugging due to kernel taint
<4>[ 12.941091] nexus driver initialized
<6>[ 12.999268] nexus.ko: virtual irq: enabled (273)
<6>[ 13.004012] nexus.ko: shared gpio banks: enabled
<4>[ 15.012943] version: 20200312094253-u171
<4>[ 15.428852] LCD: ILI9226
<6>[ 15.730336] input: gigablue remote control as /devices/virtual/input/input2
<6>[ 15.737881] DVB: registering new adapter (_gigablue_)
<6>[ 15.913838] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 15.964907] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 15.974281] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 15.994037] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 16.002539] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 16.018076] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 16.037659] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 16.052620] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
<6>[ 24.948253] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 25.905780] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,data=journal
<6>[ 27.683495] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[ 27.713230] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[ 27.721419] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 29.719585] bcmgenet f0b00000.ethernet eth0: Link is Down
<6>[ 41.478653] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[ 41.487064] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Hi, danke!!!!! Das wars. Wie soll ein normalsterblicher wie ich sowas jemals rausfinden können

hallo, wollte für kinox die neuen Zugangsdaten in die kinoxto.py eintragen, finde sie aber nirgents. Hat vor langer Zeit mal funktioniert. Bei der DreamOne geht es, ist dort aber kinoxto.so und die kann ich nicht auslesen.

Bei Kinox brauch man keine daten eingeben,du meinst Serienstream und man trägt auch nichts in die Py / so ein

für Serienstream benötigt man die Zugangsdaten vom Anbieter, das ist mir schon bekannt. Ich suche aber für die kinoxto.py den aktuellen kx_url = 'https://kinoz.to'

Da wird schon ein Update kommen für den E2i player im Mediportal läuft es ja noch.

Bei meiner DreamOne lief es ja, aber auf der Gigablue Trio nicht mehr. Das mpgz Update geht ja nur noch auf Dream Boxen, so habe ich es verstanden. Habe jetzt aber den Eintrag für die kinox.py gefunden " kx_url = 'https://kinoS.to' " damit geht es wieder.