Thema: problem restsrt E2

Hi I installed opennfr 7.0 on the external flash using neoboot
when restarting GUI the box not booting and I need to switch it off/on and boot the image again

I don´t know neoboot, so I can not help. Why do you not use multiboot of the receiver?

Thanks for your reply I used the multiboot of the image before and I had problems wih it neoboot is good and all the images work fine my box Ferguson u5pvr 4k ( dinobot 4k se )
its looks like the problem of Hitube Combo 4K

as I know Hitube has many driver problems.

neoboot and our Image works no good because internal Multiboot from us works similar to neoboot and Neoboot destroy some files from our Image.

I think that's the same problem as with the Hitube --> probably driver problem!


... Pumuckel

I suspect that it will also work with openNFr 6.4 since this image is also based on Python 2.x


... Pumuckel

Zitat von m.ghattas

restart e2 with openatv paython 3.11 its working

Yes, I know ... but I also know that the openATV initially had the same problem and that the driver problem was only eliminated later by the software. However, we will not make this effort for these manufacturers because, firstly, it is not worthwhile given the small distribution of the devices and secondly, the manufacturers should provide reasonable support on the driver side and should not rest on the tricks of the image builders and their free time.

If you want to use openNFr, then please choose the 6.4 image


... Pumuckel

Ok, if 6.4 doesn't work either, it's a different problem than with the Hitube, but this doesn't change the things I mentioned before about driver support from the manufacturers and the time it takes to fix problems with mini manufacturers.


... Pumuckel