Thema: Neue GoCard

also bei meiner Duo4K läuft die Karte auch nicht im internen Kartenleser mit GBox nur in der Easymouse mit den Configs im Spoiler
gbox.cfg

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 01 } 192.168.1.2 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
#V: { 00 30 } #Slot 1+2
V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
F: { 43 } /dev/ttyUSB0 // rs232 com1# f�r externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# f�r externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1

softcam.cfg

########################################################################################
#
# Softcam settings (OLD)
#
########################################################################################
#
# SoftCam EMM Log configuration
#
# Save EMM data
# 00 Do not save anything (default)
# 01 Save processed EMMs (/var/tmp/emmproc.bin)
# 02 Save rejected EMMs (/var/tmp/emmblock.bin)
# 03 Save both EMMs
L: { 00 }

# Check additional OSC Frequency !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# 01 Check on, Value in KHz , example 8MHz=08000
F: { 0000 }

# Check additional Baurate for ATR !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# 01 Check on, Value in bit/s, example 81861
B: { 0000 }

# Enable TPScrypt Support
# 00 TPScrypt off
# 01 TPScrypt on (default)
# 1* don't use PTS on Viaccess cards
# 2* don't use PTS on Cryptoworks cards
# 3* don't use PTS on Viaccess and Cryptoworks cards
# 4* use ICE on Cryptoworks cards
Y: { 01 }

# Empty RS232 buffer before writing
# 00 No reset
# 01 Reset Buffer (default)
E: { 01 }

# SoftCam Blocker/Filter definition
#
# 00 = Allow EMM (default for all)
# 01 = Block EMM addressed to:
# all card
# | shared address/provider
# | | unique address/hex_serial
# ----------------------------------
I: { 00 00 00 } Irdeto All SA UA
V: { 00 00 00 } Via - SA UA
S: { 00 00 00 } Seca - SA UA
N: { 00 00 00 } Nagra All SA UA
C: { 00 00 00 } Crypto All SA UA
O: { 00 00 00 } Conax - SA UA
D: { 01 01 01 } NDS All SA UA

# Timeout Definitions AND com1/com2 delays, all delays to be entered in decimal !
T: { 00 02 02 } ATR timeout (normal*X), instruction timeout (normal*X)
T: { 01 00000 000 } Irdeto : byte delay (1e-6 s), instruction delay (1e-3 s)
T: { 02 00000 000 } Seca
T: { 03 00000 000 } Viaccess
T: { 04 00000 000 } Nagra
T: { 05 00000 000 } CryptoWorks
T: { 06 00000 000 } Geldkarte
T: { 07 00000 000 } Conax
T: { 08 00000 000 } NDS

[generic]
reset_rs232_buffer = 1

[slot-1]
disable_pts = 0
enable_ice = 0
alternative_frequency = 0
alternative_baudrate = 0
# ungeblockte Karte z.B. HD+
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 0
save_rejected_emm = 0

[slot-2]
disable_pts = 0
enable_ice = 0
alternative_frequency = 0
alternative_baudrate = 0
# ungeblockte Karte z.B. HD+
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 0
save_rejected_emm = 0

[slot-3]
disable_pts = 0
enable_ice = 0
alternative_frequency = 0
alternative_baudrate = 0
# ungeblockte Karte z.B. HD+
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 0
save_rejected_emm = 0

debug.txt

gbox.net 2.2A/Linux@ARM ( Mar 2 2016, 20:44:30 ) git811.K
mode 03
AU:03/update:01/Keyfile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
enx_conf = 0 ; reset on zap=2
Total 0 ports to monitor
CPU ARM
using LinuxTV api3
Couldn't open /dev/sci0: Device or resource busy
Couldn't open /dev/sci1: No such file or directory
/dev/ttyUSB0 opened with 1 multicam(s)
Couldn't open rs232 port /dev/tts/1 (No such file or directory)
mode: any pid
have to init card 3
ATR : 3F 77 18 00 00 C2 47 41 00 68 90 00
Reset Baudrate = 9600 Baud
emergency exit done
Viaccess Card

CaID 0500
Serial (UA) 00005xxxxxxx4 (002xxxxxx6)
Issuer FFF400
Provider00 FFF400 PPUA 2399AAF6 ISSUER
Provider01 032920 PPUA 2399AAF6 SAT Orange
Provider02 032940 PPUA 2399AAF6 Zone reserved3
Provider03 040810 PPUA 2399AAF6 SRGSS
Provider04 043800 PPUA 2399AAF6 REDLIGHT
Working Baudrate = 9600 Baud
card init ok
entering main loop
ReRead pmt.tmp
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****
ReRead pmt.tmp
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****
ReRead pmt.tmp
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x0652 ProvID: 042820
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x071A ProvID: 051900
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x074C ProvID: 051900
*ECM: CaID: 0x0500 Viaccess -> CaPID: 0x0526 ProvID: 043800
ECM: CaID: 0x1807 Nagravision (Kudelski SA) -> CaPID: 0x04F4
ECM: CaID: 0x0647 Irdeto -> CaPID: 0x0558
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x077E ProvID: 050F00
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x03FA ProvID: 033A00
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x0490 ProvID: 061500
ECM: CaID: 0x1819 Nagravision (Kudelski SA) -> CaPID: 0x05EE
ECM: CaID: 0x0100 Seca/Mediaguard -> CaPID: 0x05EE ProvID: 006D
**** hashTableECM 1 elements ****
**** hashTableEMM 0 elements ****
===== VIA ECM on CaID 0x0500, pid 0x0526 ======
prov: 043800, using pkey: 08
card 3 response in 518 ms
CW0: AE 19 CF 96 96 75 AA B5
CW1: 7E 92 EB FB 7D 30 B0 5D
===============================================
===== VIA ECM on CaID 0x0500, pid 0x0526 ======
prov: 043800, using pkey: 08
card 3 response in 446 ms
CW0: A9 99 08 4A 7E BD 64 9F
CW1: 7E 92 EB FB 7D 30 B0 5D
===============================================
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x0652 ProvID: 042820
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x071A ProvID: 051900
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x074C ProvID: 051900
*ECM: CaID: 0x0500 Viaccess -> CaPID: 0x0526 ProvID: 043800
ECM: CaID: 0x1807 Nagravision (Kudelski SA) -> CaPID: 0x04F4
ECM: CaID: 0x0647 Irdeto -> CaPID: 0x0558
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x077E ProvID: 050F00
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x03FA ProvID: 033A00
ECM: CaID: 0x0500 Viaccess -> CaPID: 0x0490 ProvID: 061500
ECM: CaID: 0x1819 Nagravision (Kudelski SA) -> CaPID: 0x05EE
ECM: CaID: 0x0100 Seca/Mediaguard -> CaPID: 0x05EE ProvID: 006D
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x030A ProvID: 042800
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x030A ProvID: 042820
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x030A ProvID: 042840
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x07D0 ProvID: 033A00
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x07D1 ProvID: 033A00
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x07D1 ProvID: D000C0
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x00AA ProvID: 051900
EMM: CaID: 0x0500 Viaccess -> CaPID: 0x00AA ProvID: 051910
EMM: CaID: 0x1817 Nagravision (Kudelski SA) -> CaPID: 0x00B6
EMM: CaID: 0x1818 Nagravision (Kudelski SA) -> CaPID: 0x00B6
EMM: CaID: 0x1819 Nagravision (Kudelski SA) -> CaPID: 0x00B6
EMM: CaID: 0x1817 Nagravision (Kudelski SA) -> CaPID: 0x00BC
EMM: CaID: 0x1818 Nagravision (Kudelski SA) -> CaPID: 0x00BC
EMM: CaID: 0x1819 Nagravision (Kudelski SA) -> CaPID: 0x00BC
EMM: CaID: 0x1817 Nagravision (Kudelski SA) -> CaPID: 0x00BB
EMM: CaID: 0x1818 Nagravision (Kudelski SA) -> CaPID: 0x00BB
EMM: CaID: 0x1819 Nagravision (Kudelski SA) -> CaPID: 0x00BB
EMM: CaID: 0x1819 Nagravision (Kudelski SA) -> CaPID: 0x00BA
EMM: CaID: 0x0100 Seca/Mediaguard -> CaPID: 0x00B6
EMM: CaID: 0x0100 Seca/Mediaguard -> CaPID: 0x00BB
EMM: CaID: 0x0100 Seca/Mediaguard -> CaPID: 0x00BA ProvID: 006D
**** hashTableECM 1 elements ****
**** hashTableEMM 0 elements ****
===== VIA ECM on CaID 0x0500, pid 0x0526 ======
prov: 043800, using pkey: 08
card 3 response in 443 ms
CW0: A9 99 08 4A 7E BD 64 9F
CW1: E0 0F 09 F8 54 5E ED 9F
===============================================
===== VIA ECM on CaID 0x0500, pid 0x0526 ======
prov: 043800, using pkey: 08
card 3 response in 440 ms
CW0: 3A 2A 4F B3 8F 67 B7 AD
CW1: E0 0F 09 F8 54 5E ED 9F
===============================================

sc03.info

ATR:3F77180000C2474100689000
Viaccess Card

CaID 0500
Serial (UA) 00005xxxxxxx4 (002xxxxxx6)
Issuer FFF400

Provider00 FFF400 PPUA 2399AAF6 ISSUER
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 0611
Memory 16384/26654/22602 acccess 3F
Class
from 03.12.2014 to 02.12.2018 class: 01

Provider01 032920 PPUA 2399AAF6 SAT Orange
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 0611
Memory 16384/26654/22602 acccess 3F
Class
from 03.12.2014 to 02.12.2018 class: 01

Provider02 032940 PPUA 2399AAF6 Zone reserved3
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 0611
Memory 16384/26654/22602 acccess 3F
Class
from 03.12.2014 to 02.12.2018 class: 01

Provider03 040810 PPUA 2399AAF6 SRGSS
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 0611
Memory 16384/26654/22602 acccess 3F
Class
from 03.12.2014 to 02.12.2018 class: 01

Provider04 043800 PPUA 2399AAF6 REDLIGHT
Key 00 01 02 03 08 09 0A 0B 0C 0D 0E 0F
Geo 0611
Memory 16384/26654/22602 acccess 3F
Class
from 03.12.2014 to 02.12.2018 class: 01

Baudrate = 9600 Baud

und hier noch eine Oscam Beispiel Configs - Easymouse Schalter -unten unten unten egal

oscam.conf
------------
[global]
logfile = /etc/tuxbox/config/oscam.log
emmlogdir =
unlockparental = 1
nice = -1
maxlogsize = 1240
preferlocalcards = 1
suppresscmd08 = 0



[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = local
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpemmsclean = 1

-----------------------------------------------------------------------
oscam.server
-------------
[reader]
label = gocard
protocol = mouse
device = /dev/ttyUSB0
caid = 0500
detect = cd
ident = 0500:FFF400,032920,032940,040810,043800
group = 1
emmcache = 1,3,2,0
--------------------------------------------------------------------------
oscam.user
------------
[account]
user = local
au = 1
group = 1
----------------------------------------
oscam.dvbapi - optional
----------------------------
P: 0500:043800
I: 0
-------------------

MfG

Ja, @Link nur für registrierte und freigeschaltete Mitglieder sichtbar. ist der absolute gbox-Kenner.