DreamUP Patched dm800 clone No ca found by 2nd stage loader This can be done in 2 ways. 1) You have to have a working dreambox. 2) DM800_repair, you alter dreamup to be able to use greyed buttons. Now for the first sollution. 1) Connect working dreambox DM600/DM800. 2) Open dreamup, press connect. 3) When dreambox is found by dreamup, insert Null-Modem cable in the broken dreambox. 4) Press flash button, and chose a firmware. 5) The flash progress will probably hang, its OK. 6) Open dreamup again, connect the broken box, press connect. 7) If all went ok, you can now flash box again, (Use only serial communication) Now for the second sollution 1) Connect broken dreambox DM600/DM800 2) Open dreamup, press connect. 3) When you see second loader error popup, just press ok. 4) Open 5) Drag DM800_repair in front of dreamup, and press dream multimedia logo. 6) Now press the greyed Flash button, and chose firmware. 7) The flash progress will probably hang, its OK. 8) Open dreamup again, connect the broken box, press connect. 9) If all went ok, you can now flash box again, (Use only serial communication) how to and picture PDF files is inside of the zip folder